With the provided configs it's impossible to break the driveshaft just by popping a wheelie.
- Includes a roamer configuration and two pickup configurations - regular and extended cab. These are available in the vehicle selector alongside Sport / Offroad / etc.
- Includes the following parts to choose from in Vehicle Customization (CTRL+W). Where possible these are "common" parts and should work with all the Roamers and most of the pickups (as far as the current structure allows):
- 1 "built" engine
- 1 'rear suspension' w/ 2 strength options
- 2 sets of rear tires
- 1/ea radiator for the pickup and roamer
- 1/ea oil cooler for the pickup and roamer
- 1 set of rear leaf springs
- 1 roll pan for the pickup rear bumper slot - includes license plate mounting system for left/right/center
- The rest of the truck is left stock, so you'll have to use some finesse to avoid destruction. Not a lot of finesse, but at least a little.
- This produces less horsepower than some older mods. Closer to 5,000HP than 20,000HP for example. This is on purpose... 5,000 is plenty hard to handle!
- Totally playable on a keyboard!!
Outside of simply using the provided configs, some worthwhile things to fiddle with are:
This was inspired by other, older wheelie mods - primarily by this one from ErikSW! Kudos for the original implementation of this idea.
- Rear ride height using the adjustable stunt springs.
- Rear diff - open / welded / etc. Welded diffs are hard on everything else but allow for some wild stunts. The included configs all use open diffs because open diffs allow for more careless driving.
- Triple-Z rear tires. The included configs all use "Z-rated", again due to being easier to drive and less hard on the rest of the drivetrain.
Dismiss Notice
In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.
In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.
Outdated Torsion D-Series Wheelie Monster r17
Bulletproof Edition
Recent Updates
- initial refresh for v0.13 Jul 25, 2018
- Mercy & Ext Mar 12, 2017
- Initial v0.8 support Mar 9, 2017
