Released RK's Highly Customizable Engine (Now V8!) 4.2.2

I've looked at the first and last 5 pages and even use the search bar to search this thread, all to no avail. So my question is, for the customizable radiator, what unit of measurement is meant to be used for "radiator area"? square feet, square meter, something else entirely...?

 

Is there a mod that actually adds the right engine models selected in the mod or no? I kinda am weirded out having a v10 in my engine bay with no v10 in said engine bay.

 

It´s m²: https://wiki.beamng.com/Engine_Thermal_Simulation.html

 

R4NKING, Did you read my comment?

 

Hey there, i discovered some issue with the mod, while Building an Ibishu pessima. I will link a Pic with the issue.
If i add the Programmable ECU and add additional Mods, where to setup the Exhaust valve, boost map and co., there will be an Error, when i Empty all settings in there, and the car stopped working with an Error Message:

 

Hey, do you also have some drivemode mod which you selected for that car, so it already has drivemodes?

 

There's a problem with replacing the engine with RK one. There's a buzzing noise coming from the bus and I notice my parking brake can't disengage and it's permanetly on. There was another mod for the bus from a different creator that had the same problem and it's missing this because if the recent update: ["citybus_air_compressor", "citybus_air_compressor", "Air Compressor"], // TODO: Move this to citybus_frame.jbeam? ["citybus_air_tank", "citybus_air_tank", "Air Tank"]

Even with mods and intergrty check it still appears

 

Hi, no i didn´t have setup any drive mods so the doesnt have a single one.

 

im having an issue with the 5.5 v10 damaging piston rings and then blowing the headgasket when trying to push past 1k horsepower, can you make indestructible piston rings and head gasket?

 

those shouldn't blow if your engine is cooled enough, try to use a better radiator (mine is customizable to make it never overheat again)

 

i put the custom radiator on and turned up the settings on it and my rings still go after one hard pull, i will try to attach a file with the spec

 

RK Engine Universal don't work in the TAZ Pack, but works with Hirochi Talent (yes, i am know, that doesn't work with every car mod). Can you please RK Engine Universal so, to work with all mods? Screenshots are attached

 

"When you will you be able to..." sounds like an unfriendly ultimatum. The mod creator owes you nothing you know, and being impertinent won´t help either.

 

try to zip pack what you want to send, the actual important file didn’t send (you can’t attach .pc files on the forums for some reason)

 

""When you will you be able to..." sounds like an unfriendly ultimatum. The mod creator owes you nothing you know, and being impertinent won´t help either." I don't know how to write politely, so I wrote like this

 

Oh, then it´s a language problem, not an attitude-problem, I apologize! To write politely, you write things like "Can you please make ...." and "Thank you" won't hurt also. Respect the work that´s been put in by the mod creator, in short.

 

Yo, I found a bug in the Diesel engines, when equipping it on the Bus the handbrake gets stuck

 

Hi, i have problem with changing boost maps, everytime i try to change it (ctrl + q) it will say " drivemode: BRC" if anyone have any solution how to fix it please reply. thx

 

you can't have drivemodes and boost maps sadly. You can remove the drivemode stuff from the car and then it should work

 

supercharger wont go over 14 psi