DX11 - Performance (post your issues here)

Sorry for being such a d...k
My issue resolved its self, by using http://www.guru3d.com/files-details/display-driver-uninstaller-download.html and then reinstalling the display drivers.
Anyone upgrading to Win 10, I'd highly recommend using the linked tool.
Getting now a stunning 110-120 fps on grid map, great job on it!

 

780ti SC
i7 4770k
16gb ram

Fps nearly doubled for me on most maps, specially maps like east coast.

On my laptop fps increase was only small, like 5-10fps more but on my pc the increased performance is incredible!
Specially with multiple vehicles. Thanks!

 

Same here!, We have the same CPU, but I'm running a GTX660TI, still earning its keep.

 

Did you build you're pc or what? Because u have amazing FPS while im running about 2-10 FPS on my Acer.

My Spec's
6.00GB installed ram. 5.80 usable,
Processor Intel(R) Core (TM i5-3337 CPU @1.80GHZ
windows 10 home

 

Intel i7 3770k
AMD Radeon R9 280
8GB ram

My FPS isn't bad but seems to be the same as the DX9 versions.
I get around 60-75 fps at east coast and in some areas of the map like the town it drops to 45-50 fps.
At JRI i get around 60 and in some areas drops to 40-50

So the 60-75 fps areas are like half the map, the FPS changes a lot.
I am really happy with the performance of the game right now, the only thing I would like is it to be more steady and not drop 30 fps in some areas.

On East coast does your FPS drop a lot in areas like the town and some other areas of the map? Or is it steady everywhere?

 

Not noticeably. There is always a difference but it isn't huge. Maybe 5-10Fps.

 

Guys you also have to know some cards were designed for dx9 or under so this may cause a drop in performance i suppose it's even completely incompatible with winXP so ya know try to look up your gpu specs before posting

now my post

not noticeable increase until i updated gpu drivers
i have gtx 960 4g and i5-4690k 8gb ram and win 8.1 x64

 

GTX 550ti
i7 3770 cpu
8gb ram

On dx9 I could get 40-75fps with mid settings on all maps but now on dx11 I could not get past 20fps on the lowest settings and it had tons of stuttering.

Load times are still the same as well as the sim speed, its just the framerate.

 

Out of interest do you have any other DX11 software to try?

Looking online, seems a few games have higher performance in DX9 rather than DX11 on the HD7850. War Thunder in particular takes a rather large FPS hit in DX11 versus 9 (still pulls over 100 though). Seems an unusual quirk if so though. Someone was also reporting issues in the witcher 2 under DX11, unusually low performance in DX11.

Just wondering if you have more software to test with because details are somewhat scarce. Might shine some light on whether it is truly the games fault or yet another odd AMD driver quirk.

 

Guys you should do a Dx9 and Dx11 benchmark to see if the problem is your gpu or Beamng.Drive it will help gabe so he doesent have to read as much comments, like a filter

 

Same here AdR, I have the same AMD video card. My system is about 5 years old. Time for a major upgrade. I'll put together a nice rig, I got money to burn! Ha! I'll take my time during my free time, too much work lately.

 

Might well be game issue then. Need dev feedback.

Maybe Beam, warthunder and witcher are oddballs? I dunno.

But yeah, #NvidiaMasterRace next time around eh?

 

In places where my FPS was high I gained up to 20 FPS more. In places where it was low I have only gained 5 at most. Overall increase = ツ.
SLI seems to be working ok. Though sometimes My FPS seems to get stuck at around half what it is normally. On my Concrete carnage map I get 60-80 FPS but after going in and out of the map editor a few times It will sometimes get stuck around 30-40 FPS. It's like my two graphics cards have come out of sync and are sending frames at the same time instead of alternating between them. I get a bit of screen tearing while its doing it. Restarting Beam fixes it though.

The only other thing is when in hood/bonnet view the Covet will disappear/flicker just before completing a loop.
It was fine on the first release of the DX11 build, but after you released the invisible cars fix this was happening. (See Video)


Also as others have mentioned the car is a bit sluggish to load when starting a map. Its kind of dark and semi transparent for a few seconds. After which it loads in just fine.

Pc spec in my signature.

 

Yes with gtx 780ti no problem !

 

I've gained quite a bit of fps, but now i am seeing microstutters. Doesn't happen to much but it does and makes it a bit hard to play at times. I have ran DDU (Display Driver Uninstaller) reinstalled the newest stable drivers. I've tried a few other version of drivers as well. Still seems to happen. This is with a HD6950 2gb you can see the rest of my specs in my sig.

I'll attach a video it's not great but you can see what i mean.
https://www.youtube.com/watch?v=tXbtKtwuW8s

 

I have this problem when running borderless fullscreen, going true fullscreen resolved it.

Also, defrag your hard drive. It could be stuttering because it's loading all the assets from a slow hard drive.

 

It's installed on my ssd that shouldn't be the problem. I'll try the full screen thing here in a moment.


===edit===
https://youtu.be/JrxzGECYh2w still having the problem this video shows it really well.