Development Screens (Each post contains a picture OR contributing post)

I did some research and found this
mercedes benz AMG GLE63 S suv 2.619tons
bmw x5 xdrive50i 2.575tons
land rover discovery sport 1.927tons

 

If it's roughly the length of the 800, it'd probably be more like the x3 than the x5. The x3 weighs 1755kg (dry) with the 20i 4 cylinder engine, and 1945kg with the 35d 6 cylinder diesel engine according to the BMW website. So around 1900kg for the top of the range model seems reasonable.

I do wonder where the person above with the many many 1s got his information from though, as my quick google search shows all of the cars he mentioned weigh about 300kg less than he said.

 

Wheelbase can be a bit shorter

 

Alright, since it's more x3 than x5 (the x3 and 3er have the same wheelbase, and I think the 800 is more likely to be based on the 3er), I'll just keep it at it's 1915.72kg (l6) for now. Once there is a beta and people who have actually driven a SUV give feedback, it could be improved.
It drives as I would expect it from a modern SUV, but it's also a lot of fun with the comfort struts since it sometimes tips over in a corner and I have no idea why .



Also, sadly I can't release it, it's too shy

 

hmm, that rear end looks meh! how does it look with the license plate between the taillights?

 

Drunk with power, eh?
not really don't murder me

 

The ETK l badge makes it look like an ugly pig, will be fixed of course.

 

Grip roll maybe?

Definitely needs the license plate way farther up. Also the taillights kinda look terrible, maybe a chrome stripe and some rearrangement?
Not exactly like this...

 

If he were to design it off of that it would need a much lower trunk.(hopefully trunk is the right word)

 

Trunkline I think. Anyhow, it could at least need something similar.
#Bentayga

 

I think so , I tried to just apply the edge Split modifier which looked worse then before but I try this Method with a mix of it ; thanks for the tip.

 

Just put a chrome stripe on it, that should fix everything
I'll put the license plate up on the tailgate, donno where to put the logo then though...hmm, let's see how it looks tommorow.

Exactly, that's one big problem I couldn't see - what would my mods be without you...
Also, that would fix the space problem with the badge and the plate probaby.

 

Compared with a x3, this is how it should look like ( the number plate, and the rear bumper )
I've added the chrome bar as a bonus :3

 

mmmm sexy. thanks to @Atomix for the mesh!

 

Try a 55 degree with the edge split, it works great for me. I can't remember where but i believe it was mentioned that in between 50 and 60 and I've been using 55 since

 

Tat's perfect, also the 1500 definitely needs a petrol V8.

 

it is making a return

 

pretty satisfied with the final result inspired by the 037 Stradale Olio Fiat Livery, someone knows why i put that number?

 

The UV mapping took a while, but hopefully you guys can appreciate how nicely the planks of wood line up

 

that is amazing. Really nice work! i have always wanted to see something like this in beamng, but lacked the skill to do it.