WIP Beta released Ibishu Condensa Electric Drive w/ Overdrive 4.1

SushiPro submitted a new resource:

Ibishu Condensa - The Covet has been redesigned for 2017! Safety, electric power and sounds included!

Read more about this resource...

 

Sedan?

 

This mod is very good and fun
If possible, please add a more mundane version with a low power engine. If you need some specs, this is a good place to look at: http://resources.mynewsdesk.com/image/upload/t_attachment/t29mrnj5qhmaghpegang.pdf
Ignore the HEV parts, the EV parts are for the full electric Hyundai Ioniq (a real car that's bigger than the Covet, but should have similar mass and power to the electric Ibishu). Basically they went for a 88 KW/120 HP engine and a single reduction gear with 7.5:1 ratio.

Thank you for making BeamNG better by sharing your creations!

 

SushiPro updated Ibishu Condensa with a new update entry:

Transmission update

Read the rest of this update entry...

 

I've noticed something weird. It shakes when you are sitting still, and it turns right very slowly and left very quickly! Its like the wheel axles have problems

 

The shaking is due to the weight of the battery pack and the nodes the cameras are attached to. I haven't noticed turning problems though. Is the the rate at which the wheels steer or actual handling?

 

Rate at which the wheels steer

 

I'm unable to replicate the issue. Can you do a recording so that I can see?

 

Kinda busy "studying" for finals
and I don't have my laptop atm.
Oh and another thing, there is a faint image of covet still on the back hatch

 

I did notice that, but I haven't any idea how to fix it. I'm not great with materials.
Good news: I've almost fixed the camera shaking
--- Post updated ---

Where's the fun in that? I'll do an eco/range version I guess.

I don't think I could do a sedan version 'cause I don't have the material expertise to re-texture everything.

 

You should see how I make my gauges; diffusemap only, and I use paint bucket to fill the rest of it in! #idontknowwhatimdoingatall

 

The fun is, a vehicle that can roam and explore maps when on a keyboard, without getting to 300+ Km/h, or
do economy testing and get extended mileage, or
try to pull heavy trailers or
try to get around normally with a normal everyday car, but electric (especially if you have a steering wheel)

BeamNG.drive is a very capable simulator, so I enjoy normal travelling at least as much as the more extreme crashing/speeding experience.

Thank you for listening to my request.

For the AdamB issue, check if it only happens on some maps - some bugs show that behaviour. I had a similar, more severe problem with the Burnside Special, where an outdated mod borke the front axle when the car was spawned.

 

I've fixed the steering issue (I found it ), wobbling (camera and body), added an eco motor, fixed textures/materials and more. I should have it up by tomorrow.

 

I like the title, nice Family Guy Reference

 

condensa
still pretty covet
im guessing its a joke about how long current gen cars last around the world
ex:nissan tsuru .nissan sentra with interior changes

 

The reference comes from Blue Harvest, when Princess Leia (Lois) is talking to Han Solo (Peter) about how he needs a new condenser but since there from New England, They say it as Condensa.

 

SushiPro updated Ibishu Condensa with a new update entry:

Compatibility, stability, braking, AWD tweaks and more

Read the rest of this update entry...

 

funny is is it says it safer yet theirs no other wheel like on the 200bx where theirs a Airbag wheel or something, but I'm guessing that takes a lot of work to make
--- Post updated ---
But its also stiffer so it holds up more in a crash

 

An airbag steering wheel is on my list of things to add. As you've mentioned, the cabin is stiffer in a crash. I've also edited the front so that it fully deforms before the cabin does. The battery pack aids in side impacts.

 

SushiPro updated Ibishu Condensa with a new update entry:

Cool gauges, airbag steering wheel and other fixes!

Read the rest of this update entry...