WIP 1983 Ford LTD Crown Victoria

no, im not, that post was NOT, there when i made that post, im 100% sure that that post did not exist when i made mine, as i looked through every single post in the thread, before making that post, just to make sure that he didnt say anything like that -_-

 

Ok so I thought I'd better show something so here are the redone pillars

 

Looks fantastic! Can't wait to cruise around in this boat.

 

This an Nadeox's 1999 Crown Vic. Its like heaven

 

Ok, so finally my graphics card has arrived and has been installed

Expect progress quite soon

 

Yay! 2 Crown Vics are better than one!

 

I've started work on this again after quite a long break due to many different reasons. Anyway I'm just happy I now have the time to spend on this and I'm glad to get this back on the road

Expect pictures soon when I've got it into a more presentable form

 

what gfx card u got ?
also is this good on fps

 

I cannot waiting for this car to make its debut, hopefully you will have no trouble along the way, good luck!

 

YESSSSS!!!!

 

Done a load more work on the mesh mostly adding in interior parts and redoing previous mistakes Alot more detail still needs to be added.

Crappy renders as always

 

Things are coming a long way, nice work. Are you going to jbeam it yourself? or adapt one of Gabe's?

 

Thanks, I'm working a big update at the moment to make things interesting so I'll post it soon. As for the jbeam I'm not really sure yet, i want to create my own but if i cant then ill go with a modified monnhawk jbeam by Gabe. I was able to create a few n/bs for RoR and its only easier with BeamNG so I should be fine

 

Very nice work, Keep it up.
About the cop version, what are you going to put on it.

 

Nice model, I really like the car.

 

Excited for this car!

 

Suite mayn i wontedd this cur 4 soooooooooooooooooooooo longe!!!!1!!11!1!11111

 

Oh, nice progress last week...defo looking great!!
And stop allowing awesome sauce to troll you.

 

Thanks a lot, thats really useful, stuff like door jambs in particular

I was planning to do for a while so I'll put my references bellow as I guess someone else might benefit from them too. I've got stuff like removed bumpers, stripped interior and really clear pictures of the under-body while the car is on its side.

Also progress will be up later today so stay tuned

- - - Updated - - -

Ok so after working on it for ages I've got a ton of progress done:

All wheels and wheel trims completed
All new frame, much more accurate
New bumpers and other details for LX and S trim levels
Cleaned the whole body and under body
Added more detail to the doors and pillars
Got most of the edges set up for smoothing
Fixed huge problem I found with the boot interior
Fixed problems with the under body modelling and added in small details.
Started the rear axle

Anyway time for pictures

This time they're at least half decent renders.

Steelies:

"S" hubcaps

"LX" rims

New vs old frame:

Body and things




Holy crap thats alot of pictures