Outdated ETK 800 Sedan 2.3

nodeOffset will do that very easily, brend is just too lazy to update his mods

 

Oh, I didn't realize that there was a new suspension added, thanks for notifying me
I'll look into it.

Just node offset won't work since the wheels are offsetted themselves
I updated this just a few weeks ago, go make a Vertex

 

I see the rear window is finally fixed, great job @Bernd.

The roof doesn't connect with it though, there's a little gap between the two surfaces.

 

Actually, you can move the wheels with node offset. This is the relevant piece of code, which offsets the stock ETK suspension, including the attachment nodes, 10 cm forwards. I've also attached a jbeam, which is the ETK suspension with this offset applied. Just replace the normal modded coupe suspension with it, and you can see it works fine with all options for yourself.

Code:

   "slots": [
        ["type", "default", "description"]
        ["etk800_brake_R","etk800_brake_R", "Rear Brakes", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}],
        ["etk800_differential_R","etk800_differential_R", "Rear Differential", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}],
        ["wheel_R_5","etk_wheel_03a_18x9_R", "Rear Wheels", {"nodeOffset":{"x":"$trackwidth_R", "y":1.31, "z":0.32}}],
        ["etk800_wheeldata_R","etk800_wheeldata_R", "Rear Spindles"{"coreSlot":true}],
        ["etk800_spring_R","etk800_spring_R", "Rear Springs", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}],
        ["etk800_shock_R","etk800_shock_R", "Rear Shocks", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}],
        ["etk800_swaybar_R","etk800_swaybar_R", "Rear Sway Bar", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}],
    ],
    "flexbodies": [
         ["mesh", "[group]:", "nonFlexMaterials"],
         //rear running gear
         ["etk800_lowerarm_R", ["etk800_lowerarm_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}],
         ["etk800_tierod_R", ["etk800_tierod_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}],
         ["etk800_hub_R", ["etk800_hub_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}],
         ["etk800_upperarm_R", ["etk800_upperarm_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}],

 

Am I the only one experiencing this? (door panel missing)

 

Please bring back the ETK 800 SUV

 

The ETK SUV was never finished. Presumably, it's still being worked on, but any pictures you may have seen have been from beta testers.

 

I also wondered where it was, only if Bernd "selled" the mod to a experienced modder, but i think it's under the tombstone now

 

Again: the ETK SUV is Overpowers now.

 

and overpower is very busy with other things

 

so are you gonna make a etk suv i am confused

 

So
Bernd No suv
Overpower yes suv

 

So it's on other user hands?

 

I would believe so

 

Yes

 

At last it isn't dead

 

Can someone make like a chassis mount wing for it ot at least put the gtrx wing on it

 

Why When You Put A Tuned 3.0L Engine In It The Exhausts Are Removed?

 

cause update changed exhausts

 

Don't know about the most recent version, but tuned 3.0L engine used to lack the exhaust slot completely.