Oh, I didn't realize that there was a new suspension added, thanks for notifying me I'll look into it. Just node offset won't work since the wheels are offsetted themselves I updated this just a few weeks ago, go make a Vertex
I see the rear window is finally fixed, great job @Bernd. The roof doesn't connect with it though, there's a little gap between the two surfaces.
Actually, you can move the wheels with node offset. This is the relevant piece of code, which offsets the stock ETK suspension, including the attachment nodes, 10 cm forwards. I've also attached a jbeam, which is the ETK suspension with this offset applied. Just replace the normal modded coupe suspension with it, and you can see it works fine with all options for yourself. Code: "slots": [ ["type", "default", "description"] ["etk800_brake_R","etk800_brake_R", "Rear Brakes", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}], ["etk800_differential_R","etk800_differential_R", "Rear Differential", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}], ["wheel_R_5","etk_wheel_03a_18x9_R", "Rear Wheels", {"nodeOffset":{"x":"$trackwidth_R", "y":1.31, "z":0.32}}], ["etk800_wheeldata_R","etk800_wheeldata_R", "Rear Spindles"{"coreSlot":true}], ["etk800_spring_R","etk800_spring_R", "Rear Springs", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}], ["etk800_shock_R","etk800_shock_R", "Rear Shocks", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}], ["etk800_swaybar_R","etk800_swaybar_R", "Rear Sway Bar", {"nodeOffset":{"x":0, "y":-0.1, "z":0}}], ], "flexbodies": [ ["mesh", "[group]:", "nonFlexMaterials"], //rear running gear ["etk800_lowerarm_R", ["etk800_lowerarm_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}], ["etk800_tierod_R", ["etk800_tierod_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}], ["etk800_hub_R", ["etk800_hub_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}], ["etk800_upperarm_R", ["etk800_upperarm_R"], [], {"pos":{"x":0, "y":-0.1, "z":0}}],
The ETK SUV was never finished. Presumably, it's still being worked on, but any pictures you may have seen have been from beta testers.
I also wondered where it was, only if Bernd "selled" the mod to a experienced modder, but i think it's under the tombstone now
Don't know about the most recent version, but tuned 3.0L engine used to lack the exhaust slot completely.