More progress on the air suspension Still I need to make the rear suspension actually stay together and add all of the required models. --- Post updated --- I've decided to abandon the idea of a 4 link in the Burnside, and instead I've softened the Springs a bit and I've added airbags just to help them and to lift the car up for driving position.
Started the plastic part of the bumper, its like done already. ALso I fixed all the panel gaps on the back, the front is already good Its coming along really well, I just need to get the chrome part next. This is what it should look like when i'm done
you could use the new air suspension as released in the new update you could also use my tutorial(though i'm not sure that it might still work) worth a try though https://www.beamng.com/threads/tutorial-how2make-airride-airlift-suspension.42570/#post-640464 good luck
I've decided to abandon the idea of a 4 link in the Burnside, and instead I've softened the Springs a bit and I've added airbags just to help them and I am using air suspension the problem is that the burnside special only has a leaf spring setup and there are no good spots to mount an axle from the barstow, so what I ended up doing was to use softer and lowered leaf springs along side of the airbags (simmilar to what you can see on some heavy duty pickups and vans). It limits it in therms of how low can I get it to go, but at least it is able to keep the car level when up and it is a tiny bit lower than a stock led sled in the down position.
Not to be rude, but your awfully slow XD, I mean you are just a beginner so I can't really judge you, when I was a beginner, I was probably that slow too.
three months of work... ...................................................... : : ...you'll soon see why --- Post updated --- ...aaaand some work on the T90 mod: .............:::::::::::::...no normal maps......... ::::: .. ...vs........::::::. ."wip" normal maps ....... only cosmetic work left, mod coming soon.
I think it would probably be kind of weird to name a car after my username, haha. :: ೖ(⑅σ̑ᴗσ̑)ೖ :: Ignore the front, it's reeeeeeeeeeeeallly bad right now. I'm likely going to end up just redoing the whole front end, as I have a better idea for the headlights, and there are just a lot of things wrong with it right now. (^-^*) Edit: Much better! (*^^*)
Ah... ahaha, I'm realizing now that I should have separated the doors after I finished the main body. Those are actually two separate parts, I just joined them temporarily to show the wireframe. they lined up nicely when I first made the doors, but I've since added and moved a couple edge loops on the body which is why it's like that. Shouldn't be too hard to fix though. (^^)