Released WLD FS30-2 diesel-electric locomotive

How can i add more “0” to the couple?

 

\SteamLibrary\steamapps\common\BeamNG.drive\content\vehicles\semi.zip\vehicles\semi\semi_fifthwheel.jbeam
Were it says:
["fwk1", 0.0, 2.12, 1.13{"couplerTag":"fifthwheel","couplerStrength":2801000,"couplerRadius":1}],
you put:
["fwk1", 0.0, 2.12, 1.13{"couplerTag":"fifthwheel","couplerStrength":280100000000000000000000000000000,"couplerRadius":1}],

 

Thanks, but how can i mod the Jbeam files?

 

Notepad++
Is freeware!
or windows notep- No, really, use Notepad++
Dowload it fron here: https://notepad-plus-plus.org/download/v7.5.8.html

 

I have add more 0, but nothing, at minimal impact the dry van gets uncouple by the T-Series

 

Are you using the long or the short frame?

 

T65 Short frame (2 Axels)

 

use the long frame or change the semi_fifthwheel_short.jbeam
I expected that youre using the T75 because more power

 

What do i change in the Jbeam?

 

This:
["fwk1", 0.0, 1.094, 1.13{"couplerTag":"fifthwheel","couplerStrength":701000,"couplerRadius":1}],
for this:
["fwk1", 0.0, 1.094, 1.13{"couplerTag":"fifthwheel","couplerStrength":7010000000000000000000000000000000000,"couplerRadius":1}],

 

Thank you so much!

 

No problem.
Sorry for the off-topic BeamDrifter! You may wan't to delete most if not all of the oftopic. Also, did you see the Arcanox hybrid logic on his hybrid bus? that thing is amazing, Im trying to repurpose that code to make it work on the F7, you may want to look at it too! Arcanox said it is open source.

 

Need to downlod!!!

 

No one cares

 

How do I switch point on the track?

 

I think that’s something he designed and is not out, but feel free to correct me if I’m wrong.

 

No, Onion Pacific

 

K, that post was like two to three months ago.
--- Post updated ---
Also I agree with Onion Pacific

 

Cab Interior (WIP)

The seat textures are ugly and they will be changed. The speedometer works like it should and shows the wheel speed very accurately. The throttle and brake levers also work. I need to add a fire extinguisher and more details and then the cab should be done. After that I'll finish the engine room. The engine and the generator room are modeled but they need textures. The radiators and air compressors etc in the rear of the locomotive aren't even modeled.

 

Wow. You've made a lot of progress. Keep it up. Pls.