\SteamLibrary\steamapps\common\BeamNG.drive\content\vehicles\semi.zip\vehicles\semi\semi_fifthwheel.jbeam Were it says: ["fwk1", 0.0, 2.12, 1.13{"couplerTag":"fifthwheel","couplerStrength":2801000,"couplerRadius":1}], you put: ["fwk1", 0.0, 2.12, 1.13{"couplerTag":"fifthwheel","couplerStrength":280100000000000000000000000000000,"couplerRadius":1}],
Notepad++ Is freeware! or windows notep- No, really, use Notepad++ Dowload it fron here: https://notepad-plus-plus.org/download/v7.5.8.html
use the long frame or change the semi_fifthwheel_short.jbeam I expected that youre using the T75 because more power
This: ["fwk1", 0.0, 1.094, 1.13{"couplerTag":"fifthwheel","couplerStrength":701000,"couplerRadius":1}], for this: ["fwk1", 0.0, 1.094, 1.13{"couplerTag":"fifthwheel","couplerStrength":7010000000000000000000000000000000000,"couplerRadius":1}],
No problem. Sorry for the off-topic BeamDrifter! You may wan't to delete most if not all of the oftopic. Also, did you see the Arcanox hybrid logic on his hybrid bus? that thing is amazing, Im trying to repurpose that code to make it work on the F7, you may want to look at it too! Arcanox said it is open source.
Cab Interior (WIP) The seat textures are ugly and they will be changed. The speedometer works like it should and shows the wheel speed very accurately. The throttle and brake levers also work. I need to add a fire extinguisher and more details and then the cab should be done. After that I'll finish the engine room. The engine and the generator room are modeled but they need textures. The radiators and air compressors etc in the rear of the locomotive aren't even modeled.