Hey. Sorry if the question is stupid or was answered multiple times: how do i find the folder where my automation car is so i can Upload it here?
Documents/BeamNG.drive/Mods Thats the correct location as @PlayKoyote24 likely had a spelling error on his part
Questionable take it up with the devs if "Mods" is spelled "Mids" because on all systems I know of its "Mods"
Thank you. If i upload this folder, you can see my car in BeamNG.drive? I have tried my best to make it look good and copied some techniques frm other mods i saw. It is not the first i made but the first i show others pls be not to hard. It is supossed to be a hyper car but nor as fast because i had no luck with turbo. i took ideas from other cars like pagani and koenigsegg too. Just write what you think about it --- Post updated --- Here i have two images
It looks really good, really surprised as i thought "oh no, not another" my first mod"" post. Just be more confident about it nobody will be critical
thats such a cool car, great job . the rear, i was impressed, really good ones, but the front is kinda plain, my opinion, making the front bumper like a zonda revolucion styled, will make it wayyy better. overall this one is real good. keep it up! btw do you already set the rear downforce yet? as its got 3 spoiler+diffuser on the rear and for turbos i think i can give you some help.
Honestly i took Inspiration from the zonda mod in the forum for the rear. The wings should lift the car. But i have three so problem is adjusting means not a bit more downforce but three more. Or three percentage instead of just one. I also think front is bit plain, but i kinda like it that way. Thanks for the nice words and i'll think about the turbos. But as i figured out how i can make much power without i might not need em
Note that everything in automation that related to aero(spoiler\wings,lips and such) will automaticly add downforce, and its really important for high performance vehicles to make the tires keep on 'lick' the ground to make more grip in cost of higher drag(air resistance) resulting lower acceleration and top speed, but better than flip tge whole car. Keep downforce as high as posible as long the suspension not bottoming out.thats my tips. My design advice?: Try different things you never did before,in the end of the day you will enjoy the ressult, trust me I think you can keep the main grile as your 'identity' which make its stand out from others, also try make a side vents for it. Anyways there is still loonnnggg way to improving,as you can see how crappy my first uploaded mod, but now its really different. So keep try new and different things
Rear suspension Was bottoming out like all the time... Or wait: is the red curve downforce and the blue... Upforce or the other way around
If the line goes down thats means its lifting(the air lift the car up) which is bad can cause unstability, but if its goes up thats the downforce Blue if front ,rear is red(or vice versa as i forget it xP) --- Post updated --- Another note: Make sure the location of the driven wheel or where the power distribution biased at(ex rear for rwd) have more downfore than the unpowered wheel(or whatewr they called)