Outdated ETK 1300 11.6

I have done thorough testing of the suspension and in the latest version that im now uploading the whole suspension has been tweaked further and imo its as good as it can get. One thing that people have to remember is that this is a 2 tonne car with multilink and mcpherson suspension, it will be sensitive and it wont handle a jump without getting some damage, and bending stuff.

 

OverPower updated ETK 1300 with a new update entry:

General fixes

Read the rest of this update entry...

 

The digital speed readout does not match the analog gauge needle position when using cruise control

Example: digital speed readout shows 39mph, but the analog gauge is showing 42mph. Is there a way to fix this?

 

Is it me or is the front wheel axles really weak

 

Rear light stuck on again, also gauge cluster slightly faster than the digital speed readout. Also, did you move the shifter over? I don't remember seeing the gap before. The suspension is strong now

 

@OverPower can you add emission?

 

No, the engines used are official content foprom the common folder

 

Who will explain why the 1300 series cars are so heavy? 1354t empty weighs 2003 kg and 2015 BMW X3 sDrive20i weighs in at 1680 kg. Why the difference?

 

Minor nitpick: the fastest (TTSport+?) 1300 could use a longer first gear as it seems to be hitting the rev limiter when flooring it in Drive.

 

Air suspension maybe?

 

Have 1354t no air suspension.

 

This is a great vehicle for the BeamNG community and a class of a car that is underrepresented in the Official Content. Very nice!
The jbeam and dae work is nearly indistinguishable from official content.

A couple things:
- The "torque reaction nodes" are not functioning correctly so there is no engine movement or cowl shake under load.
- Manual transmission shifter mesh is not visible in the vehicle when chosen in the parts selector.

 

There is a need for clarity on the issue of mass. The description of the model must be registered "curb weight" (EU or USA rules). "Curb weight" means the presence of fuel and all operating fluids, the presence or absence of a driver(75kg). I prescribe for myself, in part selector presence on the seats of the driver, passenger, and three passengers in the back seat. You prescribe too? Then write about it in part selector (weight).

 

btw there is only one type of front bumper available buut there is a different one in the thumbnail

 

I always wanted a modern SUV in BeamNG and you MoFu made a ETK!!!! ur such an hero <3 <3 <3 love your work!!!!

 

Why does the car only have one type of front bumper? (All terrain bumper).. where as the rear has both.. the thumbnail shows the other front bumper bit it isn't available in the part selector.. I think that is the issu why there was no bumper in the low variant...

 

I have the same issue here, the base model lacks a bumper.

 

Sadly... but... https://modsgaming.ru/load/beamng_d...l_etk_1300_1_1_dlja_beamng_drive/38-1-0-52358

 

Hey Bro Good Mod love it,but if you can make the off-road esc kick more aggressive,and Plz a Low rang and high range Transfer Case