0.20 Discussion thread | Use Safe Mode before reporting

Yes I tried to do something with interior.dds but

how do I remove the alpha channel ??

edit I'm using paint.net

I used a different background but do I need to save as 24bit or so?

edit edit - Ah I seem to have found a 2009 plugin for paint.net to do the trick.

Thanks for pointing this out !

 

Icy spot on stone pavement:

 

It seems as though the mod manager cannot recognize mods from the same day, only ones made the day before and onward. This was tested in safe mode, and I have an attached screenshot or two.

 

I found a very weird bug. When the engine friction&engine braking is higher than the starter motor. If you shut your engine, the UI will show a "engine lock up" message, the engine friction will THEN change to INFINITY, making push start and downhill(even with jupiter gravity) start impossible. I found the bug when experimenting push start techniques. You can replicate it with some very old mods, on very high altutude, or simply change the torque via jbeam editing.

 

I discovered something odd in the frictionClutch lua :

I wanted to raise the clutch temp warning from 200°C to 300°C (provided I'd change the max temp too of course, which I did) but
line 269 says the following :

Code:

device.clutchWarningTemp = jbeamData.warningTemp or 200

If I put "warningTemp":"300", in the transmission jbeam file it breaks the lua (and therefore the car), if I put "clutchWarningTemp":"300", it doesn't break but no change takes effect.

 

I understand but all the other parameters are numbers between double quotes too and they are numerical values as well (?)

Oh I guess I need to double check that again, thank you

 

You don't even need old mods. Just take the beater Covet to Passo Stelvio to the top of the driveable road & turn off the engine; it will get disabled from the lack of air

 

I knew that, just got mixed up in the speed of the heat Thanks for reminding anyway, it's working now !

 

Then the engine friction becomes infinity, push start or even gravity start with Jupiter won't work, BUT WHY??????????????????????

 

thats why

 

There's a few spots in this outer curve where tires sink through tarmac:

 

I created a monster

 

you might want to re-post the picture?

 

It's ok

 

not a bug per-se, but shouldn't the pigeon's bed, or at least the floor of it, have its node material as metal rather than plastic?

 

Oooooh! Another thing I forgot to report this issue, I have same problem
--- Post updated ---

Another bug I forgotten to report