as someone with 16GBs of RAM, I can say RAM might be the issue, as I've only had the game crash once since the update and that was because I was using the old one so I could use the grab terrain tool
What does the ETK I-Series 2000 trunk lettering do in-game, if this car does not have a 2 liter engine? P.S. Tested in Safe Mode with cleared cache
Well it does not matter. It only happen 1 time to me and it never happens again. I close the game and restart the game again, and it's gone forever. Weird
i'm having some strange artifacting happening with only the wigeon on every translucent surface. it seems to be appearing along the wireframe, on everything from the windshield to the glass over the dials to even the headlights and turn signals. the only place it doesn't happen is the windshield and door glass from the inside. i tried highest and lowest graphics settings in safe mode, dynamic reflections on/off, and all post effects on/off, it occurs no matter what. i'm on windows 10, using a radeon rx 5500xt (driver version 21.6.1)
On the Gavril D-Series and Gavril Roamer, almost no power is sent to the wheels when a regular front LSD (NOT heavy duty LSD) is installed on non-independent front suspension with the AWD transfer case. I also tested this setup on the Hopper and H-Series with no such issue.
Subtle rectangular shading seam on LeGran wagon rear Plus wonky shading on front windows Thos cargo straps xd
When the car is not moving, I give a little nudge on the wheel, and release and the wheel start a very violent and non-stop oscillation. I set the force feedback strength to 400. I don't think this is an isolated case just for the TS-XW wheel or for me. Maybe this is caused by the new tire physics for the lack of damping on the wheel.
Isn't purpose of those white/blue straps to tie stuff to itself, actual straps to hold stuff on rack would be then different kind? --- Post updated --- I guess there might be trouble uploading again, with 23.0 it took them many hours and who knows how many attempts that Humble servers would of co-perated with their attempts. I doubt they would forget it, such cannot happen
Hello, there is a problem that i have noticed for a long time on the ETK 800 that is not present on the other vehicles. The emergency braking lights in connection with ABS flash even with light braking, especially at high speed. We can see in the video that on the Cherrier the brake light behave normally while on the ETK the ABS starts for no reason.
There's about 40 pages at the moment so I'm not sure if this has been reported before this post but, when I press the brake it automaticlly presses my clutch, and when I don't touch anything my clutch stays at 50% with it working fine if I don't gas nor brake and just push the clutch. Anyone know how to fix this? will provide more details if anyone needs more info --- Post updated ---
That sounds like in game play options there would be clutch assist on, have you checked that it is off?
When I push the throttle down 100% the clutch goes from 0% to 50% instantly, and then goes down from there to 0%, when braking the clutch goes from 0% to 50% and then up to 100%, when trying to remove and redo the brake bind the clutch is being used too as show under here (I was only pressing the brake and not the clutch)