Hello, after looking for the new Rallye category (Rc4), i've tried to get a powerfull Rallye Car with a 3 Cylinder Engine. With the Turbo Everything Mod, I've add a 30PSI Turbo to the 1.2 i3 Engine, and I get 230hp~ en 275Nm. After this, I try the car, and after some kilometers, i get "mild over rev reduce" and the engine stop to work. Video: at 3:20, I get the "mild over rev reduce message" and "distribution is damaged" at 3:40, I get a big power loss at 4:20, the engine is stopping. at this point, if i go down i can drive but not with the power from the engine. and if I start the engine, he don't startup and stay at 900Rpm (speed from the starter) Can they help me please ? (sorry for my bad english, i'm french)
So I think that engine is revving too high, and also the little 3 cylinder engine wasn't made to have this much power. What you might be able to do is give the engine a better block, by selecting a performance block or a heavy duty block.
It's not possible to select --- Post updated --- select a performance long block, but i have set the "undestructible engine" from turbo everything
Hello ! I've fixed my issue. I try to remove the indestructible engine, I set the Heavy Duty distribution, and I've try to optimise the engine settings. So I can reach 212cv (horse power) and 260nm with a rpm limit at 6750 and a big turbo at 27Psi (1.9-2.0bar). And finally i get my powerfull 1.2 i3 Rallye car. I can drive more than 10km without killing the engine, so i think it's sufficient x) Thank you for your help, and maybe i can make a video from this amazing car !