Annoyingly rotating the camera 180 degrees.

Hi, I have a problem that if I play normally and control the camera via the Num keyboard, then if I press 2 (num), for example, the camera found will turn completely backwards. I looked at the settings and there is that when I press NUMPAD4 or 6, the camera turns back again. But it just switches me to camera 4 or 6. So I don't know how to turn the camera back. Pictures:

 

I'm a little confused by your problem, as pressing 2 on the number pad just points the interior camera down for me. I assume you're doing this, but in case you aren't, are you pressing 4 and 6 on the separate number pad, or just on the normal number keys? Pressing 4 and 6 on the normal number keys will change you to those cameras (external & chase), but holding down 6 and then holding 4 while continuing to hold 6 turns the interior camera around like in your picture. I don't know if any of that makes any sense, but hopefully it does.

 

So normally for me it is like this: Num 4 and 6 are for lookind sideways, Num 2 and 8 are for up and down, Num 9 and 3 are for zoom and lastly Num 5 is for centering the cam again.
I dont really know what happens to you there. But i know that sometimes in BeamNG the cam is a bit scuffed. I had the Cam locked back problem already too, but only after using Num 1.
Such things can happen if: 1st. There is a lag in the moment u release the button. 2nd. :U tab aut of the game. 3rd. : It can also happen if u press the wrong key whilst u press Num x. All in all, maybe try to explain better (more detailed and less complex). Hope u can get rid of it. Ahh i forgot: If u press Num2 too long u get too the lowest point possible. if it doesnt stop there, then thats the problem bc ur cam changes automaticly direction.
normally it should stop there. hope could help here.

 

I think the devs are looking into this now (https://www.beamng.com/threads/driver-camera-bug.80986/#post-1352376)

For the time being see if pressing ctrl + L helps when this happens. I personally think there's a tiny bug in the orbit cam (yes, orbit but triggering the effect in the driver cam) which causes this on a minority of users with a certain hardware setup, but this is just a guess.

 

Díky moc za radu, ale nakonec jsem zjistil, že v nastavení ovládání je nastaveno na NUM 1 otočení dozadu. Prostě jsem tam vložil náhodný klíč a kamera se už neotáčí! Ahoj...

 

https://beamng.com/game/support/policies/forum-rules/

 

Wait I didn't write it in English? So I'm sorry otherwise I said that: Thanks a lot for the advice, but in the end I found out that the control settings are set to NUM 1 turn back. I just put a random key in there and the camera doesn't rotate anymore! Hi ...

 

If you turn on the chase camera it locks to the back of your car