Performance issues with AMD GPUs

you have two different cpus??

 

exactly what i was wondering lmao

 

Specs:
5800x
6700XT
2x16GB 3800MHz Dual Rank Ram
B550i Aorus Pro AX
1440p
All overclocked (No errors)

Used DDU for a totally fresh driver install (21.11.3)

Ultra preset settings

I also tried everything, Fresh windows install, default BIOS settings, no software running, no overclocks and it's the same performace, every other game is totally fine.


Support ID 116346


250 FPS in Grid Map


80-90 FPS in Italy


60 FPS with AI (7 Cars)



Totally unplayable massive stutter/lag/microstutter in some maps like Small Island


The clock speed seems be extremely jumpy and if you put the min MHz close to the Max MHz in AMD Settings it does help but is still here

I also sometimes get very low FPS Eg 40-60 FPS in industrial zone/small island even at Normal settings.

If you need any more info just ask
--- Post updated ---
Grid map FPS (It didn't want to put it on in the first post)

 

I can barely hit 60fps in wcusa on normal-low settings with 5 traffic cars. I got better performance on my 900 dollar laptop, this is a very powerful computer.

 

Flex lmao

 

I get you bro I have the same GPU but with a 3700x instead I had better performance on a 2080 Super every other game I play almost doubled in performance in 1440p lmao

 

I get insane performance in every other game except for this one. I don't understand whats wrong with beamngs engine.

 

Ah crap, meant to say I have an integrated graphics card (AMD RX Vega 7) as my GPU lel

 

my rx570 8gb while more powerful than my old gtx 960 has provided underwhelming results when in beamng and its only gotten worse with the updates.

i cant find the performance thing where do i find it?

EDIT: just realized it was old menu instructions idk how to find anything in this new ui

 

delted

 

My gpu usage corresponds with the stuttering. It heavily fluctuates between 80% and 30% It used to just be the core clock but Ive disabled deep sleep with morepowertool and I have a minimum clock speed set (which actually works now). Theres a lot less stuttering, but there's still some and the framerate is way low.

 

CPU: AMD Ryzen 5 5600X 4.65GHz
GPU: AMD Radeon RX6700XT 12GB (newest drivers 21.11.3)
RAM: Kingston FURY 16GB DDR4 3200MHz CL16
Support ID: 117223

idk how to enable perfomance graph after 0.24 update so there's screenshots from MSI Afterburner
low-ish FPS is in any more demanding map (West Coast, Italy etc.)
GPU Usage on any Map is not higher than 80%, there's some stuttering, lower on higher, depends on actual situaltion and the fps is way lower than it should be

 

About two months ago I had like 15 fps average and now I get 40 fps average sometimes 60.
My gpu is a AMD Radeon Vega 8 on a AMD Ryzen 5 2500U

 

i cant find the stupid performancce graph but i hope this helps.
Specs GPU some sort of special edition rx570 with 8gb v Ram
CPU AMD rysen 5 2600 six core 3.4GHZ
2X 8GB ddr4 ram.
Something something b450 motherboard(I can’t remember now)
--- Post updated ---
Oh crap I forgot to unlock my frame rate. Idk if that’s important or not.

 

To open the Performance Graph with new UI : Escape > Options > Performances > Open Performance Graph



I'm particularly concerned by this thread as I plan to buy a AMD computer and mainly play BeamNG.

 

Update on Shuttering with new update (0.24.1)

Fixed some maps and Small island (beamng official map)

But shuttering is still happening on some mod maps like "Ultimate test terrain" and "Roane County TN USA"

(6700XT) (Newest Drivers)

 

My Radeon R9 290 runs at 50-55fps on normal setting with grass density at 55% and Anti Aliasing off. That seems a bit low, right?

 

I did some more testing and I found out some maps have shutter and all maps with traffic/more than a few cars causes unplayable shutter on my 6700XT on 21.12.1 Driver.

I looked at the clock speeds and it seems to be jumping from "gaming mode" (High clock speeds) to Deep sleep mode (Very low clock speeds (Around <50Mhz) when the CPU is loaded more or on some maps with a single car.

I Hope it gets fixed soon as I can barely play Beamng anymore with this shutter.
--- Post updated ---
I think this issue should be put in https://documentation.beamng.com/known-issues/

 

theres a more power tool fix for this that works pretty well but not 100%.

https://forums.guru3d.com/threads/d...mpt-can-potentially-remove-stuttering.438164/

it removes the stuttering somewhat but the framerates still suck

 

Deep sleep is important to me as most of the time my PC is at idle or light loads