Did look in case you listed the problem but didn't find anything - car drifts ever so slightly to the right
A meshslap is a vanilla vehicle J-Beam (like the SBR4), slapped onto a different mesh (like the Aventador). These vary in quality from having custom parts, moving doors, and a well edited J-Beam, to being unedited, slapped with ETK wheels and uploaded to 3rd party sites.
So a really unfinished mod? --- Post updated --- So basicly "untrusted/unverified mod" or mods that are done by noobs? Is that right how i recall it?
For some reason the Aventador S and SV configurations are not on the list. I only see the regular LP 700-4, SVJ, stanced, race, and hill climb versions of the car.
Delete the old version of the Aventador (Natan's Aventador) if you haven't. Go to your user folder (appdata/local/beamng.drive/0.24) and delete the temp folder (basically clearing cache but quicker). Also go into the vehicles folder and delete any folder that has a name similar to the Aventador (e.g. natanavent) assuming that you didn't create any custom configs. If there's isn't a folder, you're done, make sure you have the latest version of the Aventador in your mods folder and launch beamng.
After I did that, I still got no S and SV configurations for some reason. Idk if I did smth wrong but I did exactly what you said. I do appreciate the help so thank you though
Try going to options then user interface then try seeing if "show custom vehicles in vehicle selector" shows up. If not, then take a screenshot of the Aventador thumbnails (with the LP 700-4, SVJ, stanced, etc) and maybe I can see what the issue is.
What I do is go into vehicle config, go to save and load, then choose either one of them from their by hitting load. Works for me.
Awesome job! But I wouldn't classify it as a meshslap though, meshslaps tend to artifact pretty bad and are one solid piece. This dosn't.
It depends on how well edited it is and how well it fits the body, that separates good meshlaps from unedited spiky ones
No it is a meshslap, A meshslap is a mod that reuses beamng cars jbeam for example SBR4 and edited or not it will always be a meshslap, jbeam must be scratched on most parts for it to be classified as a mod not a meshslap mod
No, if this was true then the H-Series would be a meshslap of D-Series (whole bottom half is literally almost the same, cab is really similar, and the van body is based on pickup bed which you can tell by node names), meshslap is only when there aren't many modifications and all the existing ones are lazy
Very nice mod ! But the front and rear wheels are inverted, the front are wider than rear actually, otherwise good job i like it
Make sure you have legacy tires (I'm not actually sure if this mod uses it but it might help) from the repo, otherwise, you can adjust and change the wheels in vehicle customization (crtl+w) by going to independent front and rear suspension.
