installing rear axle is nearly complete then is to rough up the main shalle and install the front stuff (suspénsion and steering)
many styles, as well as the brazilian grill https://motortudo.com/wp-content/up...et-Chevette-SL-E-1.6S-1990-Motor-Tudo-14.jpeg --- Post updated --- the plan is to make the car leave the US market in 84 but persist in Latin America for maybe 10 more years
GM did that to create the 153 https://en.wikipedia.org/wiki/Chevrolet_153_4-cylinder_engine --- Post updated --- just tomake it clear: the car is modified retrofitted freshened up Blockhead from Flatout 1. WHy? because I likethe drab shape of the car
will the electrovette concept car be added (copied from wikipedia) Electrovette[edit] In the 1970s, General Motors Advanced Engineering developed a concept car, the Electrovette, based on the Chevette, but using an electric motor powered by lead-acid batteries. The car had a range of about 50 mi (80 km) at 30 mph (48 km/h), and a top speed of 53 mph (85 km/h).[14]
been dolling around with the car adjusting bits and such, the thing drives! now the rear axle needs some adjustment, it is a floppy mess
Happy to report that The rear axle can stay together after 1600HP --- Post updated --- wheelies to spare!
why did you put this together before even texturing it. i thought i was the one with screwed up priorities
because cosmetics is comparatively easy. and if for some reason I could not pull of the making a working Jbeam it wouldn't be worth doing any serious meshwork