0.26 Discussion Thread

Good afternoon developers! since update 26.1 the ignition does not work. Only engine on and off works

 

Reverified again (done it a hour ago already). All files ok, like before. Problem however is no longer present. Reason is unknown

 

when setting up "ignation & engine off", the ignition is not turned off and the dashboard lights up

 

I do still have a few complaints regarding the understeer and oversteer assistant on a controller, and further improvements could be sought for. While the assists are welcoming for a more user-friendly driving experience, bottom line is I find them to be unpredictable and have significantly undesirable effects for driving.

As mentioned with my previous comment, the steering behaviour from the understeer assistant as the car goes into a slight oversteer/small drift at speed sometimes prevents the user from countersteering the slide. It's noticeable even when keeping the stick full opposite lock to the turn, but moreso when the throttle is fully applied. Viewing the steering app shows how aggressive the assistant(s) limits the countersteering ability. With the understeer assist disabled, catching a drift is more predictable as the understeer assist is sometimes fighting against me in how much it chooses to countersteer (either allowing fast rotation to straighten the car or not enough), depending on how much the car drifts. Even lowering the understeer reduction strength to where you're losing most of the benefits yields similar results.

With the oversteer assist, I believe it would be ideal for it to dampen the car's rotation predictably while allowing the user's inputs to balance and control the angle of the car more precisely with less of the snappiness, as I commented on the 0.25 discussion thread.

 

What's the difference between "Ignition and engine off" and "ignition on engine off"? How does it affect the vehicle? Cheers guys

 

licence plate clips through bumper of covet.

 

The patch has fixed NONE of the issues I'm having. The display & graphics settings still reset to the default and the map select is completely broken. Verifying files, clearing the cache and reinstalling the game has done NOTHING.

 

IGNITION things not working at all! Car spawns with working engine anyway

UPD. Need to change car to enable trigger.

UPD. Still IGNITION thing not working. Only Engine ON/OFF at spawn.

 

There is a bug on the 200BX rear suspension. It is really bouncy! When entering 'Vehicle Config -> Tuning' there are no adjustments for the rear suspension when the rear race coilovers are selected. Upon clicking apply in the tuning tab, the rear end of the vehicle suddenly becomes much higher, without doing any changes to either parts or tuning parameters.
Another smaller issue is a typo, there is a space missing after the number 3 in 'Stage 3 Performace Long Block'.

 

I've noticed a bug recently that looking at some things causes the game to lag. I didn't see in the patch notes if this was fixed or not. On grid map, when you spawn on suspension the ramps behind you cause major lag. I have no idea if that's just me or an actual bug it never did it before on ultra settings.

 

Bug report: checked in safemode,missing rear suspension in 0.26.1,see in pic

 

As of .26: On Vulkan, having v-sync and frame-limiter enabled at the same time appears to break v-sync.

Disabling frame-limiter does allow v-sync to work as expected. Is anyone else experiencing the same?

Edit: I forgot to add, just to clarify this only occurs on Vulkan, DX works as expected.

 

Is the sound bug i mentioned before noticed by now if i may ask?
Greets

 

I think 0.26 broke the textures on the high performance radiator for the barstow. also found that the d series and roamer dont have any sounds for the automatic shifters.

 

Still bug in Covet in 0.26.1: 4-sp transmission has fake 5th (4th at place) gear then engage from shifter. And explain please why Driving School config has no right mirror?
--- Post updated ---

What's the sense of that? Ignition can't be turn on WITHOUT starter. It's like no ignition option.

 

Was aero or engine-braking changed in 0.26? I noticed a tiny difference in how several cars take jumps. Ive had extremely consistent landings every time in 0.25 on my dirt track, now with 0.26 I am overshooting or landing really short. Something changed since Im using stock cars and configs - no mods at all. I notice this on jumps that im near red-line (overrevving\engine-braking is in effect) or on jumps that are really long (in the air a long time)

 

Possibly make the JDM Covet differentiate more compared to the USDM models, possibly by adding fender-mounted mirrors on the JDM model (like the attached image) and adding a rear fog light into the bumper (like the attached image). Also if possible, add in European configs for the Covet and 200BX as with rear bumper recesses to fit EU license plates as these are both cars that would be sold in Europe.

 

Exactly. These two cars could very well be sold in Europe, especially the Covet, with its 1.3 SOHC and 1.5 SOHC/DOHC engines. Plus, the JDM head-/taillights and the 180km/h cluster fit just fine as they are in the said EUDM versions too.