Hi all, This is a thread where I will show all my models and projects. Not all of these vehicles are done, and a few are even abanodoned. Vehicles: -1989 Nissan Silvia S13 Stock: Type-X Based version: Onevia: -I'm not working on this anymore, but ''crazycow666'' from RoR is making the unibody and he made the onevia front clip.''GamerN3X'' is making the interior. -Ford Mustang Fastback -On hold for now, Might make it some kind of custom vehicle later. -Subdivided -Nissan Skyline R33 GT-R -This was my first ever car model, that's why it looks so bad. I will definitely re-make this as it is one of my favorite vehicles. -1998 Volkswagen Bora -Current W.I.P. -Going to model all the possible details, the suspension on this car is the first 3D suspension I have made. -1981-1983 Nissan Skyline R30 Zenki Sedan -Heavy W.I.P -Going to make other versions aswell as stock. -Thanks to Bakasan for the reference pictures. I will try to get the W.I.P. vehicles done and I will try to put them in-game when I buy the game. W E B S I T E More to come...
So, some updates after a bit of time: I've been working on the R30 some more: And new wheels: Also, I've updated the website a bit. And,last but not least, someone requested a red Mustang:
Looks good! The roof is a little too flat though, and you should be careful about the sizing of the rear lamps. Also, the wheels should have a radius of 16.25 inches (they're a 15x6 inch wheel), with 205/60/15 tyres. The tyres just seem a bit too low profile, but the rim modeling is absolutely superb! [Also, ensure the bolt pattern is 114.3 millimetres] The front of the car looks perfect, so well done!
^^^ Tires are temporary, as you can see there isn't any tread or so, I will most likely redo the tires later on. Also, according to my blueprints and reference images, the taillights seem to be sized right... Also, I know the roof is a bit too flat, I had just quickly made the roof so that I could do some renders. Just a question, did I make the front pillars right or are they a bit too thick?
The pillar thickness seems fine to me, looks just fine compared to the picture: (imported from here) Keep in mind that the placement of the chrome trim is important in deciding the pillar width. Also note the slight curve of the pillars, when you go about adding the details.
^^^Okay thanks, also thanks for telling me about the curve. Hadn't noticed it before By the way, does anyone have a blueprint/frontal pic of these wheels?
I actually wanted Razer11, but it was already taken so I used my older name. Meanwhile, I figured I'd show some progress here: I got bored and did some SSR Mk3's, Hotplate tail's and 2 renders of the R30 : Right now I'm just waiting for some better suspension pictures to start the suspension Also, I made a hub for the Bora: (open images in full size for full quality) Any suggestions or (constructive) criticism would be appreciated!
