0.31 Discussion Thread

and how to fix the problem when using vulcan, performance drops to 9 fps on the west coast usa map, when using direct3d 66 68?
--- Post updated ---

I think if you use vulcan, then you can solve the problem with the fps drop with dynamic mirrors, more precisely, fps will fall somewhere from 70-80 to 60 frames, and not from 60 to 50 or even worse 45

 

"Lookahead" under camera settings is what you search for my friend.

 

has anyone else had this issue?, when i go to load a saved config that i just made for the t-series it saves but then loads the default truck in all white.

 

i dont know if this is a bug or they changed it but in the wheel selector wheels are not in sort by size any more and this makes finding the wheels alot harder
i used to find the wheel size i wanted and then pick a wheel from that size but now wheels are all over the place

also the reset button in tuning menu doesnt reset the values to factory any more and just resets it to what it was when the car was spawned or saved
sometimes i made a car and saved it but later on i found out some tunings were wrong so i reset it to factory and it was all good again but now if i saved the car i cant reset any more

if these arent bugs just please revert it to what it was cause it was much better that way
thank you

 

I also noticed this bug in Moonhawk, I hope they fix it in the next hotfix

 

As much as this updat is lovly, i bliv it to b littrly unplayabl.

 

Camera still zooms in when I enable multiseat. This has been going on for at least 4 updates. This needs addressed!

 

What the T series really needs now is ABS.....The brakes are really easy to lock up [because the moment I press the brake pedal, the wheels slip]

 

I dont know if it is only for me but i found this weird spot, uhhh i dont think gravel needs to be here actually

 

When unlocking trailer, saddle will clip to frame of the trailer making them impossible to separate.

Also, give back infinite zoom out in orbit camera

 

Had this too

Also, the bloom slider in photomode doesn't work for some reason

 

i cant load a single custom config i made. Not just in the t series i just cant load a single custom config in any vehicle (vanilla and mod vehicles)

 

The following T-Series configs don't have any license plate by default:

• TC82s Cargo Box Upfit
  
• T83s Flatbed Upfit
  
• TC83s Flatbed Upfit
  
• T83s Cargo Box Upfit

 

My two cents here: Why is it that old cars (carb'd ones) seem to take quite a few cranks to bring the engine to life, odd considering that they're all essentially brand new with zero miles on them. Ideally the engines should fire up second or so revolution and not 8th or 9th, in previous update (.29 maybe?) one could hold the start button and release on the first crank and that would be enough, are all the classic engines compressionless and over rich? Now its current behaviour would be realistic for hot starting in Utah (especially so late model Moonhawks) but considering we dont have hot/cold carburetion simulation it really just stands out as a sore thumb, especially so as someone who drives a classic car everyday. Now in the case of a damaged or worn out (not simulated yet either) engine its very believable the current starting behaviour.

I also dont believe the new wheel selection panel is one of the best decisions made, though a step in the right direction

And um when are the older cars going to get some different starter sounds? Current one is good for the Burnside because it sounds like a big ol' six volt cranker but, err, its a little out of place on all the others

 

Combatwombat96 -I daily drive a 57 year old Valiant, safest, most comfortable, quietest, most reliable car ever, and only one of those is sarcasm. Guess!

I'm guessing "Safest"

 

Handles on the front end, under the windshield.

 

Not sure if this has been mentioned or if I am just doing something wrong, but the compression brake on the T Series very rarely works for me. Only gear it will ever come on in is 4th when it decides to and turns off as soon as you downshift?

 

Try changing the compression setting, I only really noticed it at 100%. and make sure it is turned on. There are buttons for it in the cab.

 

It doesn't matter what I have it set to. I have it at 100% every time I tried it. It should come on every time you let off the gas and like I said I can barely get it to work and when it does it's in 4th or 5th gear only

 

https://drive.google.com/file/d/1LL1Edr1d1oWvvWaPVIbI68P5LrmLioGI/view?usp=sharing

(not mine, its from davidinark)