WIP Beta released ETK PACK (Version 0.1)

So far the only things I have done on the S-Series and 1300 are just buffing up the radiator, the exhausts as well as adding V12-compatibility (the icpipes and the radhoses) and putting wider rear wheels on some higher level configurations. This would mean that the JBeam rework would hardly have any effect across both S-Series and 1300.

For the rest later on, just credit me on the V12 fix plus the wide rear wheels (and tires) addons and you can do whatever rework you want across both vehicles. Please do make sure the configs with wide rear wheels keep the wide rear wheels.

 

The S-Series folder name has been changed from "etkss" to "etks".

 

I see, it would be just renaming everything "etkss" to just "etks", thanks for letting me know about this. The V12 stuff is in the common folder so I wouldn't worry.

 

Are you planning to change the interior in anyway? As in digital gauges or different centre console.

 

any tips on how to install, tried moving the download into the mods folder with no sucess

 

Would be sick if you guys added a 50i/50d version for the k/s and 1300 series.
And to expand, you should defo add a 1300 coupe sloping rear end similar to the x6, or a etk hatch like the 1 series

 

50i is the 450 version, and 50d is the 380d. There are no plans for a coupe-crossover yet.

 

I would like to remind you that BMW has a tendency to understate their horsepower and torque figures by 10%, for example the BMW M5 CS has 617 hp from the official specs, but when going on a dyno test it has the same power figure but at the wheels instead (which means at least 10% understatement and more like 15% understatement).

 

aight

 

Progress on the S-Series remodel that @drstr is working on.

 

is there anything else changed besides the front bumper, I like how it now matches the etk design language

 

Okay this does not look bad. It looks more like a remaster more than a remodel (or a remake)

 

For the newly added wheels, could you please add a widened version of them (rear wheel only) as 19x12 rears just as I did before?

 

is it like a facelifted version or is it completely reworked

 

New steering wheel model for the ETK 1300. I am not the best when it comes to certain models.

--- Post updated ---

This is a Redesign of the ETK S-Series and not a Facelift we are refrencing old pictures of NinetyNine's old redesign which was never released.

 

Nice job. But there is one question. Will it be a replacement for existing parts or new additions?

 

In the parts selection menu there will only be these front bumpers and headlights, and rear ones, but for the rear ones there will also be ttSport, it is not ready yet.

 

Please add this as a facelift model, don't delete the old headlights

 

I like that the new bumpers exist, but could the old ones still be in? even if just part selector only..I think most would like that

 

Here's what I want to say about the old front bumpers. Firstly, the new ones are no different from the old ones except for the cutouts for the headlights and the radiator grille, which are more in line with ETK, and secondly, the old headlights from part of the 3D model are of poor quality and do not correspond to ETK. About the bumper assignments, I can add that the stock one is almost the same, only the diffuser will be more beautiful, and the second one is completely new and does not change anything, but only adds. In general, such a redesign (namely a redesign, not a facelift) was conceived by NinetyNine.