0.4.3.0 Current bugs and help thread [0.4.3.0]

Having issues with my Logitech Rumblepad 2. Throttle & Brake control is mapped to the right stick, but when in use the stick acts like a pedal. The car accelerates at half throttle when the stick is centered, full throttle when in full up position, and throttle is off with no brakes in the full down position. I triple checked to make sure I was mapping the Throttle & Brake control and not mapping them separately, but this is definitely an issue with how that control is being interpreted by the game.

 

grid map has so much of grass and dirts it is so laggy my com specs: intel i3 dual core 6gb ram intel 3000 hd family graphics card and windows 10

 

I have a list of transport is loaded for a long time, about 1 minute. In alignment with the version 0.4.2.2. I have composed a list of about 200 modifications

 

I found some bugs:

Bug: If you go Full Throttle if you stand still (of course without breaking) on the Covet Rally Version, the front axis breaks and you are unable to steer then.

Potential Bug: Why does the normal Covet DX doesn't have the second mirror (it is the only version that does not have the new second mirror, all the other new version have two side mirrors)?

 

Not a bug. Some cars manufacturers back in the day considered an extra side mirror as an additional option. The standard Covet doesn't have one to mock that I assume.

 

Well, at previous update I got my pad (Logitech Rumblepad 2) completely not working. Now it worked for about 5 minutes till I discovered that I don't have brake at throttle/brake axis. I tried to fix this up and pressed "reset all" in controller configuration. And now I can't attach any button/axis to action, because when I press button it just become blank. (at hardware window everything works fine)

Don't know what can I do now


edit: My problems with Throttle/brake axis seems to be the same as SPOOKA have

 

You could use the Mission Editor to remove the grass, and anything else too. In windowed mode, press F11. Change your view by clicking the camera icon upper left, switch to Orbit. You can now move the camera around with the mouse and WASD. Go to paint the terrain with F3, and use anything but grass to cover up the grassy areas. You can see the material to draw on the bottom right of the editor. Aside from lowering graphics that may be the only thing that will fix it. Those specs are low for a game like this. After editing make sure to save the map. Hope I got all of that right, not at home currently.

I'm allowed to offer suggestions in this thread, right?

 

Wow, what an amazing update! So far I have only found one bug. If the custom Pessima lays on its side, the wheels fall off and glitch around.

 

Hi. I have a problem. If I change car few times in freeroam controls (keyboard) stops reacting. Only Esc works and if you click on options menu controls start working again. I have fresh instal and no mods.

 

Gridmap is insanely bright so cannot see anything. bit of a upset as with my pc specs thats the only map i can play on.

 

Beam.NG drive takes eternity to load now +when it finally loads, and I select and load map, it doesn't show UI. pressing ESC, ctrl+E or ctrl+W doesn't show it up

 

Most of the time the Barstow's door windows bend like metal instead of shattering like glass. They are able to shatter, but most of the time they just don't.

 

In free camera I can't move my "head" up or down, I can only go side to side. In order to go up or down I have to use page up and page down, but in the world editor I can move normal. Can anybody tell me how to make this happen when I'm not in the world editor.

 

game crashes on startup, here's the beamng.log and beamng-launcher.log:
I also added the screenshot of when it crashed.

 

Sometimes UI doesnt responde, car selector loads slow, and when I change camera view, speedo value changes from imperial to metric.

 

Can't even launch game!!! Just comes up with BeamNG logo like it does when it's about to start. Help would be greatly appreciated.