T series doing a wheelie?

Heyheyhey!

Was trying to make a t-series pop a wheelie, didnt manage to do that whit an engine that makes 17.000 nm of torque.
I was wondering if anybody has accomplished this, if you have feel free to post what you did, (mods, ect)
If it is impossible, could someone help me accomplish my life goal

 

The T-series is big. And heavy. No. It's not going to do a wheelie.

 

I'm gonna try to make it do one anyways... I doubt it will work out well.

 

You could mod it so its rear engined so all the weight is in the back and use it on the 4x2 model

 

What about a counter weight om the back?

 

It is possible to do a small wheelie with the cement mixer configuration, when you dump the clutch at full throttle in first gear. It only happens using a manual transmission, though.
With a little more power and 1 axle less, I'm sure it would do epic wheelies

 

use the t series addon and put a race engine in it

 

Challenge Accepted. Stripped all front weight and put on the mixer, reversed, the dropped it in first. Still not much, but a wheelie nonetheless.

 

Shorten the wheelbase

 

this is my wheely set up it works for 3 or so seconds if u do manual and u shift just right, but u need to max the rpms in neutral first!

no mods!

here a video of me using it =

 

https://gyazo.com/7981cbb95154a63f89613c21b5d74925

Removed the rear axel and added grippy wheels and a race engine

 

very nice m8 it works good