Development Screens (Each post contains a picture OR contributing post)

Truck kinda works now which is nice, next job is the rear suspension. I ran into issues with having my frame extension nodes called "fe" instead of "fext" and the hood had a node called "fe6" so it kinda got a bit messy.

 

This skin comes with red seats and fire extinguishers

 

Zappy's 10-step guide to styling modern SUVs:

1. search "1997 toyota tacoma water pump gasket"
2. b u e n o
3. search "toyota chr"
4. die inside
5. sketch concepts styled the exact opposite of modern SUV design
6. remember that SUV styling is difficult
7. search "american suv"
8. hate everything
9. start modelling with no reference
10. search "1997 toyota tacoma water pump gasket"

 

Well the wrecker body I started modelling for the T75 looks a bit small now...

 

Alright, alright, I got carried away and stayed up much too late.

Annoyingly, its big dumb face is growing on me.

Excuse the lousy shading- I lack talent.



This forum seems to like this game:
Spot the influences! No correct answers; I don't really know either. Figure out the country of origin while you're all at it, and help me fill in that big expanse on the front bar. Don't forget provisions for cooling and registration plate.

 

looks kind of like a range rover evoque, so maybe british or german (french?).
as for the Blank space, maybe put a vent that's half the height of the ones on the side, eg.

 

No!

Look like Chinese cars. ¯\_(ツ)_/¯

 

I've made a bumper (And i'm proud of it)

 

Looks fun! alot of fun!

 

Brusselton Incline railway

 

Updating the Pessima mod.
The mod is now a addon to the original pessima and no longer a stand alone vehicle.
The Convertible is now skinable too, this was previously not possible since i made it before the skin system existed.

 

Will you be doing the 200BX after this?

 

I do want to port it to the original 200BX, but this will take much more time since its a way bigger mod.
But in the future it will be I hope , might have to scrap some parts to accomplish it though.

 

It looks like most of the bland crossovers that you see on the road!

 

Old pic, I know

I'm working on the sounds, it is still using the automation sounds but because of the amount of samples, it is hard to get right...
I am also still fighting with the driveshaft, idk how it works at all it seems
Wheels are almost finished, only 1 type of tires is still doing weird with the mesh offset
I am going to rework some parts of the mesh too since some parts are a bit rough
Jbeam is okay, only the front fenders need some node positioning (it is a tiny bit off)

I dont have a lot of time nor motivation to work on it since it has some issues I don't know how to fix and because I am working a lot and quite tired when I get home

If someone has a good tutorial about driveshafts, send it to me

 

#progress060317
Work on ETKI Cabrio will be continued...

 

Yes, yes, finally! My prays have come true!

 

Leaks