from what i can see, it looks all good. did you try reloading? (ctrl+r) it shouldnt replace the stock bed. you renamed the part.
I know you are probably new at making mods but here are some ideas for you lowrider cause there is a airbag mod fo the D-15 and when you lower it all the way down the suspension breaks pigeon hauler minus the wheel on the cab it doesnt matter if it has the headache rack or not HEAVY 15 bed it can haul a 5th wheel and a gooseneck mini T its a dump truck i have notes for it that might be confusing NOTES idc if you steal it but it is confusing just a little bit unless you have a mind that has 9,000,000 ideas a day then maybe the hydraulic is supposed lift it. the left side of it moves toward the cab lifting the bed upward while the other side stays still. ENJOY!!!!! -Gasoline Boy to see the notes better click the attached file version of it
and perhaps we could have a long bed option, it would take me two seconds to extend the bed and plop it on the ext cab chassis with a regular cab
got a new wing on my covet! hint look closer 35 minutes and no bites! Ok I give, BeamNG's first bobbed bed??
yes, the bed is much shorter. I assure you I did not mess with the bed alignment, and it's just the nature of the beast when it comes to link suspension. With leaf suspension, the wheel will move in the direction of your shackle as the spring compresses and the distance from eye to eye increases. With link suspension, when the links are parallel with the suspension, the wheel will be the farthest rearward. as the suspension droops out, the wheel will move forward. Think of it like a clock, focus on the minute hand. At 12:15, the minute hand will be horizontal, at 12:30, the hand will be vertical. At 12:15 the tip of the minute hand will be as far to the right as it can possibly go, at 12:30 the minute hand will be down and forward. I'll post attachments to show how it looks not flexed out, how it looks flexed out on both sides, and why I bobbed the bed in the first place. As for progress, I haven't made any really. I've been kind of frustrated with beamng. I'll spend 2 hours in blender and then 6 hours trying to get the mod to be stand alone with no success. since the bobbed bed is based off torsions D-up frame, I've had to disable D-up to get his body lifts to stop overwriting my modified body lifts.
PLEASE make sure this mod can be used with other mods and the vanilla d series so that everyone can use these parts with their own personal configs please!!
Haha, of course I wouldn't do that on purpose. If you take a look at Narwhals bedliner bed, I basically reverse engineered that to attempt to get it to be standalone, no success. I've given up on this for the moment, but not to the extent that it would appear. I was out of state from the 7th to the 11th. I'd like to get back to working on this, and make all the beds separate, make the rock sliders a side step option, and possibly make the cage an option for the beds, such as the tool boxes. It's very discouraging to try and get something to be standalone for 3 hours and hardly a bit of success.
