Running out of memory

ID : 36511

I did the GPU driver update and setup the game to the DGPU.

note: when I play in small map - cliff and jungle - during the tour, the game crashed.

 

I sent the Memory Graph in my previous post , as you can see , it didn't hit the peak of the memory size.

Clean install is very hard solution due I have to pay the internet bill for it. but as I said , this problem happen once the game is updated to this version 0.12.0.4.

 

Before you try to reinstall, you can try to verify the game's integrity through Steam, or the launcher.

 

I did it before , the files are fine.

I did recapture the memory graph while loading the map. It is clear that the game is increasing the usage of the memory very fast. unfortunately, I took it before it reach the peak of the RAM limit by 1 second before My PC is shutting its screen off and freeze the entire system.

The game now becoming worst than a virus.

So, I hope this problem will soon be fixed.

 

If it's causing your system to freeze, it may not be BeamNG causing the problem, it could be hardware related. Since you said your screen shuts off, it may be an issue with your GPU overheating, and it would probably also explain the game crashes.

 

If it is due to the heating, I can run most AAA games on high/Ultra settings for hours. and the GPU heat is stable around 90.

with this game .. even I turn on my PC ,after it cools down,it crashes before the graphic objects are appeared and processed on the screen - at map loading-.

So, it is not the GPU issue.

It is the game over occupy memory. I don't have PC with larger RAM right now.

If you have one, may you share us how much this game occupy the memory when loading utah map?

 

@hashhakaj , here's my memory usage when loading up Utah. I have the same amount of Ram as you do, and I have Chrome open.

 

I agree with this being the likely cause. Even with 200gb of ram windows will still hate you for not having any room in the pagefile.
But I am also curious as to why your pagefile is maxed out at all? Something must be using up the memory and it is not Beamng.
--- Post updated ---

This.
Windows will allocate the inactive memory blocks to the pagefile to make room in the RAM for beamng. Guess what happens if the pagefile is full.

 

Appreciate

So, Thank you all for giving me the solution.
basically, I turned off the virtual memory to extend my SSD life.
So, I turn the virtual memory on to my 2TB hard drive - at 8GB- and the committed memory increased.
Now, I can play the game and enjoying with all non-mod maps .