1. Trouble with the game?
    Try the troubleshooter!

    Dismiss Notice
  2. Issues with the game?
    Check the Known Issues list before reporting!

    Dismiss Notice
  3. Before reporting issues or bugs, please check the up-to-date Bug Reporting Thread for the current version.
    0.32 Bug Reporting thread
    Solutions and more information may already be available.

AI bug after Italy update.

Discussion in 'Troubleshooting: Bugs, Questions and Support' started by NuclearKnight, Jan 3, 2019.

  1. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    First off my specs are as follows: Intel i7 860 processor, 12gb DDR3 RAM, and NVIDIA GeForce GTX 770 graphics card. So here's my problem; ever since the Italy update I've had issues with the AI. Specifically, it seems that whenever I spawn 4 or more vehicles and try to use the Script AI OR the AI menu some,if not all; cars have this issue where they rev their engines like they're trying to move but won't unless I tab over to them. Once I tab over to the vehicle, it will work as intended but the moment I switch away it starts messing up again. I have tried disabling and deleting all mods, lowering the graphics, starting in safe mode, and reintalling the game. Nothing seems to be able to resolve this issue. Also FWIW I was able to run 6-7 cars smoothly with most graphics options on before this happened and I have not noticed ANY other performance issues with the game. Thanks in advance for any help.
     
  2. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    I've noticed a lot more AI hanging bugs too, but I haven't played with it enough in the past to know if it's new or not. Same sort of thing, the vehicle sits there revving until I tab to it. It will usually say, "vehicle crashed, check mods" or whatever that message is, so I hit CTRL+R to reload the car and it's fine. Happens with non-modded cars, and modded cars, and seemingly randomly. The car will be driving just fine then suddenly suicide and say "ERROR" =D I've learned to live with it, buuuut would prefer it didn't happen.
     
  3. Nadeox1

    Nadeox1
    Expand Collapse
    Spinning Cube
    BeamNG Team

    Joined:
    Aug 5, 2012
    Messages:
    14,685
    What gearbox mode are you using?
     
  4. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    I use arcade, i did realize that may be an issue considering how much i used to hit q instead of tab but ibe mapped the left shoulder button on my controller for that so i dont think it's that. Also, i never got any error codes whatsoever but i didnt hit ~(?) To check the console if thats where it would pop up. On a side note its cool to talk yoi nadeox after playing this game since 2013 i love it keep up the great work!
     
  5. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    I default to manual but sometimes switch the AI to automatic because I feel it makes life easier for them. I'll pay more attention to this now that I know it's not just my end and hopefully I'll get you guys more info to help out =)
     
  6. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    Forgot to mention, it seems like it happens with certain vehicles such as D-series, hopper, and a couple other i cant remember. Spawned in 6 pessimas and all AI worked perfectly but if i add one or nore of the aforementioned vehicles, the bug appears.
     
  7. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    It's happened to every vehicle for me so far, the Vette, the Sunburst, the D-Series, etc.. at first I thought it was just the ETK but nope. I thought it was happening to me because of constantly changing and reloading LUA files (.. the.. lua?) while building a level and thought maybe there was a hangup in there.

    Next time it happens I'll take note of everything I can =)
     
  8. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    I will do the same, im trying my best to see if there's something IM doing to cause this but no luck so far. Thatz wierd that its only certain cars for me but not you
     
  9. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    It has happened to me in the past where I had to reload the AI when messing around on official maps, and I always just passed it off as, "... huh, strage! CTRL+R" but it's certainly not SUPPOSED to happen hah
     
    • Like Like x 1
  10. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    I never tested to see if CTRL R fixes it for me, i only ever hit R thatll be a good temporary fix thanks!
     
  11. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    R resets the car, CTRL+R reloads the car, and that will always fix it!
     
  12. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    I always knew there was a difference between the 2 I've always remained ignorant as to WHAT exactly it does. I know R just puts the vehicle back to the spawn point (either self designated by CTRL R or the default) and CTRL R could recover and reset the spawn point. So CTRL R resets the physics and R just respawns the vehicle?
    e
    Edit : physics of JUST that vehicle i shouldve specified.
     
  13. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    It reloads the car, as if for the first time entering the game AND sets its spawn point wherever you hit it.
     
  14. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    So it happened again, AI was using ARCADE tranny, and all I did was hit R, tab, R, tab, R, tab, R, tab to reset the four cars. The one car - ETK Police - crashed as before. It got to the end of it's AI run, hit my target vehicle, and I reset it. Then it refused to work until I hit CTRL+R as it was just sitting there at say 3000rpm stuck at it's spawn point. I'll post back once I get things to start happening consistently.
     
  15. NuclearKnight

    NuclearKnight
    Expand Collapse

    Joined:
    Nov 30, 2013
    Messages:
    64
    Thanks a million for the CTRL R trick it works everytime! Also i still cant figure if theres a common denominator that makes this happen.
     
  16. krallopian

    krallopian
    Expand Collapse
    NC114-85EKLS
    BeamNG Team

    Joined:
    Dec 5, 2013
    Messages:
    790
    Well I've just managed to make it happen every time.

    It happens when my AI is chasing me who is parked on the other side of a jump and I have "route" showing in the ai ui. If I turn off ROUTE it never has issues, but as SOON as it leaves the ground with ROUTE on, the car/ai bugs out and says
    Doesn't matter what transmission I'm using. Also just using Sunbursts. Pics added to show it working fine before the jump, and broken once it hits the jump.

    Now is this because the jump breaks the car or the car breaks the jump, or the "sudden change in direction" breaks the route following guide/graph?
    --- Post updated ---
    Also here it is showing trajectory and navigraph just fine - only crashing on show route.
     

    Attached Files:

    • aiError_02.jpg
    • aiError_01.jpg
    • aiError_03.jpg
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice