Dismiss Notice

In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.

Beta Bruckell IBEX 1.0.5

Bruckell's restyled D-Series clone, for a cooler clientele...

  1. 4NT4R3S
    4NT4R3S
    5/5,
    Version: 1.0.5
    Great but it must come with a cowboy hat and a flavored toothpick
  2. Roman10107
    Roman10107
    5/5,
    Version: 1.0.5
    loving the work you're doing with this mod, absolutely love it. I just have 2 little suggestions, but do you think you could possible remodel the fenders a little bit? I'm mostly referring to the dually fenders on the dually long bed. I feel like if you could smoother it out a bit and make it look more rounder by stretching it across the side lengths of the bed, it can be differentiated from the stock D-Series dually bed.
    Alongside with possibly making rear and front fenders more squarer replicating the irl counterpart, it could make it distinctive enough to be seen as its own model rather than a obvious copy of the D-Series.
    Another thing is if you can do rebadging on the sides of the vehicle, the same way like how the D-Series has to represent a model, but labeled different. Instead of D-15, B-150 or X-150 could work, but it's just examples that I thought of, it's all up to you really on what you think is best.
    1. oioioioo
      Author's Response
      Thank you for your review.

      I don't mean to disappoint you, but I have absolutely no plans to carry this mod farther than I've mentioned in the above post. It is what it is what it is what it will be. It's really not difficult to mod BeamNG once you get the general idea. I encourage you to try your hand at making something you are passionate about become reality. Success is very rewarding, failure is rich with opportunities for improvement and growth, if you'll take them. I just don't have the time or the desire to remodel the whole exterior. If you have modding questions that " https://documentation.beamng.com/ " can't answer, feel free to PM me.
  3. BlakeGaming259
    BlakeGaming259
    5/5,
    Version: 1.0.5
    Love the mod! Been following since it originally released. One bug I found is that the taillight textures are all janky. It's likely an issue with a conflicting mod but I know it's not DFA. Not sure if there's anything you can do to make it not conflict but you could, that'd be sick. In the meantime, I will try to find the problem
    1. oioioioo
      Author's Response
      Is the above screenshot janky in the same way you mention? I'm not really big on the idea of spending loads of time trying to make this mod not conflict with everything else out there... but if you know WHAT it conflicts with, I can try to find out WHY.
  4. carcrasher8848
    carcrasher8848
    4/5,
    Version: 1.0.5
    Very nice update, the badging looks great, and the additional work helps this come together even better than before. But, the one issue I have is that none of the configs show up, so I can't use them, I have to build something using the various parts. That's the main reason I only gave it a 4 star rating.
    1. oioioioo
      Author's Response
      I really don't know what the problem could be... If you're using the in-game repository, I had a heck of a time trying to update this mod on my other PC... had to delete and redownload and then cahce-clear to get it to actually update. Maybe give that a whirl?
  5. dogegod
    dogegod
    4/5,
    Version: 1.0.5
    never enough d series mods! nice to see this one get some more polish. i love the idea and i'm eager to see how it evolves.
    1. oioioioo
      Author's Response
      It's not likely to evolve much more. My only plans for the mod are listed in the above post. Once those are completed it'll only be maintenance and fixes, if that.
  6. Alek's creations
    Alek's creations
    5/5,
    Version: 1.0.5
    I love this mod. I can finally make a 3rd gen ram
  7. extrem speed3
    extrem speed3
    5/5,
    Version: 1.0.3
    really good
  8. Richard Brooks
    Richard Brooks
    5/5,
    Version: 1.0.2
    i love this mod, now it's got me wanting to see how a 3rd gen ram would look
    i do have an idea for the front signals, just there's no discussions thread for this mod yet
    1. oioioioo
      Author's Response
      Yeah, apparently you have to beg someone on Discord in order to get a discussion thread? At least that was the case last I knew... I never use Discord so................ Anyway, front signals are planned for next update.
  9. Pector
    Pector
    4/5,
    Version: 1.0.2
    Lovely mod, once finished it will most likely be a top notch mod. Props to you.
  10. bussin.buses
    bussin.buses
    5/5,
    Version: 1.0.2
    I think getting rid of the lights in the grille and making the actual headlights more Ram-like would be a massive improvement. Way better than anything I could do, though.
    1. oioioioo
      Author's Response
      There is currently a "bandaid" fix where I made the wide grilles equippable in the dove-cut fascia (Check "updates" tab for explanation), but yes I do plan to address both of the issues you bring up... Albeit in the perhaps-distant future.
  11. 0_rl3anspar1sh
    0_rl3anspar1sh
    2/5,
    Version: 1.0.2
    doesnt even appear anywhere when trying to look for it even in the d-series configurations.
    1. oioioioo
      Author's Response
      I just re-downloaded it and tested and it works perfectly. I don't have enough information to pinpoint your issue, but I hope you get it sorted...
  12. Zirconium
    Zirconium
    4/5,
    Version: 1.0.2
    It's a good mod. I know Bruckell badges are in the works, but might I also suggest adding front turn signals as well as unique taillights? It would really tie this thing together really well!
    1. oioioioo
      Author's Response
      Front signals are planned, I just don't know where I want to put them yet. Tail lights weren't planned but I'll see if I can come up with something I don't hate.
  13. Roman10107
    Roman10107
    4/5,
    Version: 1.0.2
    bro please, if you can in your power, make a cross grill design very similar to the iconic 1994 dodge ram grill, and i will love this mod as my most favorite of all time in beamng.
    1. oioioioo
      Author's Response
      lol, I can try...

      No promises
  14. V6UAL
    V6UAL
    3/5,
    Version: 1.0.2
    Honest review time!

    I really like how this looks, especially without the headlights in the grille. It has a nice, muscular "tough" design up front.

    But, it needs work. A bit of it. The new front fascia doesn't have any turn signals, somewhat breaking the look. Might I suggest putting some small indicators onto the bumpers?

    There are no Bruckell badges. It doesn't make sense to have a Bruckell with Gavril D15 badges (although i understand it's not just a one-and-done thing. Same goes for the steering wheel on the interior.

    But other than that? I really like the potential this has. It's got a good "proof of concept" going for it and i'm hoping you decide to continue updating this
    1. oioioioo
      Author's Response
      Every review should be honest.

      Most of your complaints will be addressed in future updates.

      I feel like the body of your review doesn't quite match the star-rating lol
      (Just me?)
  15. DATSUN_101
    DATSUN_101
    5/5,
    Version: 1.0.2
    the headlight insert should be turn signals for the grill
  16. kanyelover1
    kanyelover1
    5/5,
    Version: 1.0.1
    its hideous, i love it
  17. MadMaxed
    MadMaxed
    5/5,
    Version: 1.0.1
    Thank you so much for this dude. I just drive around in this thing I love it so much. It still could use a slightly less weird grill (A not so bad temporary solution is to just remove the internal headlights), some proper badging and configs and lore, and it'll be perfect

    Also, slight suggestion: if it's possible, could you make the grill go up with the hood like some older dodge trucks had? Thanks!
    1. oioioioo
      Author's Response
      I hadn't really planned on the grille moving with the hood, or even really thought of it since this is just an appearance-mod when it comes right down to it...
      I'll play around when I can and see if I can come up with something I don't hate. Badging is planned though, albeit in the distant-future.
      I don't plan on making any more configs because I already made the fenders, people who play the game can decide how to use them. I don't need to have an imagination for you too.
  18. parry 9 4 8 7
    parry 9 4 8 7
    5/5,
    Version: 1.0.1
    I think it needs a siganl on front fascia
  19. Militant
    Militant
    5/5,
    Version: 1.0.1
    I hope we'll get a lore-friendly explaination of why Bruckell started to modify their rival company's cars...
    1. oioioioo
      Author's Response
      Because I needed an excuse to stick Dodge fenders on a D-Series lol
  20. warrick
    warrick
    4/5,
    Version: 1.0.1
    i agree with the others people the headlight in the grill are a bit too much, except that i like this new front end
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice