Full parts list:
I had an urge to have hydraulics on the Burnside so here is my version of it.
The meshes, input_actions.json, and parts of the jbeam are taken from Bluebuck, hop-ability is more similar to the Grand Marshal Lowrider.
Also the frame would clip into the trunk.
Default controls are the same as other vanilla hydraulics.
- Hydraulics Control Module, under the additional modification slot
- Front/Rear Hydraulic Cylinders, under the suspension's springs slot
- 'Lowside' Trunk Pinstripe (Colorable), the paint job shown in the pictures
- 'Lowside' (A), configuration
Feel free tweaking this mod around.
Check out my version of Coupe and Wagon bodies for the Burnside Special.
If anyone's lowering the suspensions further, watch out for the transmission guard beneath the frame, it's way lower than the frame and will rest on the ground or get hit by bumps constantly.
Dismiss Notice
In the upcoming days mod approvals could be slower than normal.
Thank you for your patience.
In the upcoming days mod approvals could be slower than normal.
Thank you for your patience.
Burnside 'Lowside' Special 1.002
Let's go do the hop.
-
Images
Recent Updates
- [1.002] Added inputmap Jun 21, 2022
- [1.001] Minor beams adjustment Oct 22, 2021
