Hi,
The new 0.26 Update didn't have the Covet MR with AWD, so I decided I'd make it myself.
WORKS WITH 0.32!
Progress:
[90%] logical jbeam (powertrain, ..., I feel like some parts are missing, suggestions are welcome!)
[99%] model (I'm planning on making the driveshaft go through the old exhaust tunnel in the middle) - will probably never happen (see update 0.4.2 notes)
[75%] decorational/weight jbeam (nodes, beams, ...)
This first release (v0.1) includes NOTE: afaik, this is not packaged properly, so needs repackaging to get working (fixed in the forum release)
- a 5-Speed Manual Transaxle
- a Limited Slip Transfercase
- a Limited Slip Rear Differential (new version adapted to work with Transfercase)
- a Limited Slip Front Differential (new version adapted to work with Transfercase)
Added in v0.2:
- better default parts
- more matching Final Drives
Added in v0.3:
- a 5-Speed Sequential Transaxle
- a 6-Speed Sequential Transaxle
- Open, Welded, standard Limited Slip Differentials Front and Rear
- 4WD Transfercase with High/Low and disconnectable Front and Rear shafts
Added in v0.4:
- everything from previous updates now available for the front-engine variant!
Changed in v0.4.1:
- Fixed Hood not opening when Front Differential is used
Changed in v0.4.2:
- Removed Beams and Flexbodys from Custom Front Halfshafts*
Changed in v0.4.3:
- Cleaned up jbeam for Rear Engine Front Differentials and removed their nodes (forgot some stuff in the last update, now all diffs should work as intended)
Added/Changed in v0.5:
- Added Models for the Front Engine Layout:
- Redid most of the Parts for the Front Engine Layout to make the Models make sense etc.
- Transfercase (thanks @barabash)
- Front Left Halfshaft (thanks @barabash)
- Driveshaft (shortened by me, model provided by @barabash
- Exhaust (edited by me to fit the Rear suspension and Drivetrain, model by @barabash)
- Rear Differential (taken from the 200bx, moved)
- Rear Halfshafts (taken from the 200bx, edited to fit the moved Differential)
- Fueltank (taken from the 200bx, heavily modified to fit the Covet without too much clipping)
- Added Config: Rally AWD JDM (Rally Config w/ AWD and JDM Parts)
Changed in v0.5.1:
- Removed Rear Halfshafts for Front Engine Layout as a Part as they're not needed and just did some weird stuff to the Front Halfshafs
- Maybe (hopefully) fixed the Rear Halfshafts sticking through the trunk floor
- Fixed some stuff with the Mesh of the Rear Differential, deformation should now be WAYYYY better
Changed in v0.6:
- Fixed weird Rear Halfshafts
- Fixed Driveshaft
- Changed Driveshaft to Prop, now rotates at proper RPM
- (MR Layout) Fixed Front Diff Node scratching on the Ground
Changed in v0.7:
- Added Models for MR Layout Rear part of Drivetrain
- Added 6-Speed Manual Transmission to both Layouts
- Fixed Rear Right Halfshaft Deformation
- Fixed MR Layout front Drivetrain Models
* they caused issues because there is no transmission in the MR config in the front where they could attach to
SUGGESTIONS VERY WELCOME!
Credits:
BeamNG.drive devs: Covet, 200bx, examples for AWD/4WD powertrains
@barabash : Models & Textures for:
HUGE Thanks to you!
- Transfercase
- Alternate Front Left Halfshaft
- Driveshaft (w/ Mounts, shortened and edited by me)
- Exhaust (with complete Jbeam and tips, edited by me)
- alternate Cut Exhaust Heatshield
- Rear Differential (unused)
- Rear Halfshafts (unused)
- alternate Fueltank (unused)
- alternate Rear Suspension (unused)
- Rear Halfshafts (unused)
- alternate Front Subframe (unused)
- alternate Front Steeringrod w/ Tierods (unused)
Me: everything else (Ctrl-C, Ctrl-V, Transfercase, most of the jbeam, ... (sunburst, Stambecco and 200bx drivetrain helped a lot!))
Pics:
Left: Stock Ibishu Covet MR Turbo Evolution
Right: Ibishu Covet MR Turbo Evolution with AWD
Thread: [moved to Discussion Tab]
Dismiss Notice
In the upcoming days mod approvals could be slower than normal.
Thank you for your patience.
In the upcoming days mod approvals could be slower than normal.
Thank you for your patience.
Beta Covet AWD v0.7
AWD Transfercase and special parts for the Covet
Recent Updates
- MR Models! 6-Speed Manual Transmission! Sep 7, 2023
- Fixes upon fixes Sep 4, 2023
- Fixes to stuff that was obviously overlooked Jul 26, 2023