Experimental D-Series Swivel-Frame 1.0

Flexing on Jeeps since 1986

  1. still chill
    still chill
    5/5,
    Version: 1.0
    amazing mod
  2. Maturely Immature
    Maturely Immature
    5/5,
    Version: 1.0
    "So how's the off-road capabilities?"
    "Yes."
  3. lbctatro
    lbctatro
    5/5,
    Version: 1.0
    I have a question, some mods have body panels to put on the d-series, would this mod work with those new panels?
    1. JustOli
      Author's Response
      Some will work others will not. The cab and front have not been changed so all mods will work there, as for the bed the short frame beds are not compatible with mod beds, the long frame beds are compatible with all mods. I can not guarantee that the swivel will still work properly with all mods however.
  4. Owen Burke
    Owen Burke
    5/5,
    Version: 1.0
    This mod is perfect for offroading...
    I highly recommend this mod!
    I found this from automotiveflux
  5. automotiveflux
    automotiveflux
    5/5,
    Version: 1.0
    Very fun and creative mod
  6. CrashTestFan
    CrashTestFan
    5/5,
    Version: 1.0
    Fun mod!
  7. locualo
    locualo
    5/5,
    Version: 1.0
    great mod¡
  8. JimTheGamer Guuy
    JimTheGamer Guuy
    5/5,
    Version: 1.0
    Yes..
  9. The Fazbear King
    The Fazbear King
    5/5,
    Version: 1.0
    this is an awesome mod! maybe you could add these for all the different frames? maybe for the t series?
  10. Shadow_353
    Shadow_353
    5/5,
    Version: 1.0
    This mod is a literal flex. Not only in flexing. But for flexing on others.
    (this doesn't make any sense)
  11. erikv82
    erikv82
    4/5,
    Version: 1.0
    The idea is awesome, the execution very good in basis! It is sturdy enough, only a small amount of sagging. I ran over it, i crashed it, dropped it: the swivel endured! Bravo!

    Some things that might be added, to improve handling:

    - a sort of swaybar principle, to dampen the sudden movement. this swaybar will also counteract some of the 'torque swivel' , so the use of low rev power diesels does not instantly put me on my roof while crawling up a rocky slope...

    - a way to set the amount of degrees that it can swivel (10, 15, 20 etc.)

    - A special bed with some rounded edges around the swivelpoint, so it doesn't get stuck while crawling in extreme angles...Sucks to get stuck .


    I feel that these additions will make your mod complete, and perfect.
    1. JustOli
      Author's Response
      Thank you very much for the feedback.
      I'll work on including multiple lengths of chain limiters so you have more choice when it comes to the maximum angle it can rotate.
      As for the dampening or swaybar I'll take a look at what would work and make sense in this situation because I don't think it is something that was implemented in the original design.
      Thanks again for your suggestions and I'll see how I can implement some in the coming update.
  12. jecoyud1905
    jecoyud1905
    5/5,
    Version: 1.0
    kracc
  13. al_Falkone
    al_Falkone
    5/5,
    Version: 1.0
    Absolutely great
  14. Ja.L
    Ja.L
    5/5,
    Version: 1.0
    This is absolutely amazing. A suggestion though, it's kind of an odd idea and probably not that useful for any applications in beam, but do you think you'll add a swivel frame for the D-series offroad frame at one point? (The prerunner/baja/trophy truch/crawler etc frame)
  15. Lozza122
    Lozza122
    5/5,
    Version: 1.0
    Wow! what a mod. Didnt know I wanted it until now.
    Super fun to watch the vehicles articulate!
    11/10 swivels
  16. Zoomanata
    Zoomanata
    5/5,
    Version: 1.0
    -1 brownie point for the chrome grille
  17. Tenente Otaku 112
    Tenente Otaku 112
    5/5,
    Version: 1.0
    Amazing mod man!!
  18. CNloco4799
    CNloco4799
    5/5,
    Version: 1.0
    works as intended, you can turn the whole rear end of the truck on its side and the front stays put
  19. crashmaster
    crashmaster
    5/5,
    Version: 1.0
    been wanting a power wagon for a long time, even tried to make a swivel frame myself, but it was too floppy, didnt really work properly, gave up too early. i still wanna make a power wagon tho
    but dayum this is nice asf dude.
    great work for a first mod!
  20. dumpling
    dumpling
    5/5,
    Version: 1.0
    Christmas came early
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice