Outdated Diesel 200BX 1.1

we need an AWD conversion to the 200bx

for all those "more power" use the gasoline engine its made for power,the diesels are made for torque so that you can tow heavy stuff all over great little mod :)

Dont know why you made it when i already did it some time before, and with more engines. Im not giving 2 starts for that, that wouldnt have sense. Im giving them because first, you have the standart dashboard. Any dashboard on a diesel car shows 8000rpm. 5500 rpm on limiter on a 90's-2000's car that even seems to continue keeping power over the rpm limiter? That were impossible on that time to archieve with a diesel car. That level of rpm just would kill a IRL car of that time. Also the gearbox ratios are way too short. But i see good points: You put some time on creating a own sound, which is good. Not all modders here do that. But it doesnt sound like a diesel, and also have a empty area (no sound) btween idle and 1400rpm +/-. But eh, i dont say mine is perfect; it isnt. Just next time do a better search, because just putting "200bx diesel" on the search bar, will take you to mine. There is also another one, but i did mine since it was going to improve the existing one.

It's all very good but it needs more power, or at least a version with more

Since theirs a 4bt cummins 240sx in real life, I say, why not in Beam? You sir, have fixed that problem, I rate this 5.9/5 (P.S. Could you make one with more power, perhaps?)

Outstanding!

This mod is pretty good. Fuel consumption for the NA engine is spot-on and the torque curve looks great (although it would help if there was more low end torque and less in the mid and high range, considering it's an NA engine) with just the right ammount of power.
However there are some flaws:

-The gears are too short in the 6 and 5 speed transmissions, at highway speeds the engine is turning 3000-2500RPM and that's far too high for a diesel, where most of the torque is (or should be) down low.

-The turbo is too big on the turbo version, and there's too much power and not enough responsiveness; IMO the turbodiesel should get around 90-100hp and have a smaller turbo, as most of the time the engine will be at low revs and low throttle input. As such the turbo should be smaller, so it can spool at lower revs with less throttle, at the expense of some power.
Also, fuel consumption is too high for the turbodiesel: Diesel engines are not stoichiometric like gasoline engines are, and the ammount of fuel put into the engine is directly controlled by the throttle, so with the same throttle input the turbo diesel should get about the same fuel consumption as the naturally aspirated one.

-The 6 speed automatic would be reallistic in a truck or van, but for a car it seems too much. 4 speed would be more appropriate, as most automatic cars of this time (mid-late 90s) came with 4 speed autos.


Good mod :)

Diesel sports car? Bad idea!

Great mod!!
But the BOV isn't used on real Turbocharged diesel engines, they have Free-Floating turbo's (No BOV), so, i'll soon send you via PM a modified version with the correct jbeam coding and a little extra you might enjoy.

Great mod!

There is already diesel mod for 200BX...