I would rate this at 5 stars, but I think that there are a few issues which can be fixed, basically everything below with the exception of the parts issue, I am totally content with what there is on that front.
Dismiss Notice
In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.
In the upcoming weeks mod approvals could be slower than normal.
Thank you for your patience.

Doyler Beagle | 60s British Sedan 2.01
Last Period of 'Real British' Car
-
CampingRamen
- 4/5,
-
ParadoxShiba
- 3/5,
Overall a very nice mod, though I need to remove 2 stars because of some minor bugs. First of all, the hood is basically never closed, it always pops straight open, even if you go over a small speed bump. Second, once you full throttle with the front diff installed, the front wheels pop off, which is really annoying if you want to make a fast config for it. Third, the structure looks incomplete, lots of rough edges and bad looking areas. Some suggestions, you could make a version with a bigger trunk area, you could maybe try and add more parts to the vehicle, as the only good things it has for exterior mods is the rally lights and the air dam, other than that, everything is pretty bland. Ton of potential, just poorly executed.
-
ByteGuy
- 5/5,
60s & British = EPIC
These types of cars are exactly what I love in Beam as there are really no old British cars in Beam. Reminds me of the Riley Kestrel/Wolseley 1300, the ADO17 (Wolseley and Riley variants) and especially the Austin 3-Litre, I love the little imperfections (really fit in with the BMC vibe). Some people who say its disproportioned need to look at 60s BMC cars on a budget, as ADO17 (AKA the landcrab) and the Austin 3-Litre used Austin Maxi doors, giving the cars a peculiar yet charming look. I think that has been captured fantastically with this mod and I think it looks absolutely stunning. This is already my favorite car because it fills the gap in Beam that I've really been looking for. The only thing is the few mesh issues when crashing (JBeam), and the roof could really do with a downward slant towards the back and some rear quarter lights as per 99% of British family saloons of the era but I'm sure this mod will be improved and updated. Amazing job dude :D -
The_Tekkit_101 2
- 4/5,
Idea is great, execution is okay. Very noticable things could be fixed, like the trunk hood creases, some shadowing on the sides, no cutout for the exhaust, and the camera is too far back.
-
pixeaudi
- 3/5,
Average mod I'd say, poorly executed in some places. Firstly, the hood pops very easily (even when you're rear ended), and if you start driving from max RPM, BOOM you've got no front wheels. Also, I think it's also not very proportioned, I'd make the trunk longer.
-
-
adamgj38
- 5/5,
A great representation of a BMC/BL era British car, right down to the fit and finish being patchy as anything. I know some people have issues with the jbeam, but I like the bodywork flapping about- it gives the car more character.
-
G-Farce
- 5/5,
Agree with innocentkustoms on the Jbeam but I'm giving it 5stars because this is awesome
-
Inn0centJok3r
- 4/5,
Overall an okay mod. Imo it could have used some more development time.
Good:
The model looks pretty good and realistic, It looks like it's from the time it is supposed to be from and a good addition to everyone's car list. It has everything one would expect from a car mod
Left to improve:
The one main thing of critic is the jbeam model. it doesn't line up in most places. Aka the roof, doors, fenders, frame, bonnet, headlights, trunk, rear end body. The Bonnet has no latch, hence it will immidately start flapping around on any kind of bump. It does crash okay but the jbeam just needs some work in it. In fact, add another set of nodes to the bottom of the bonnet (grille area) as that has literally no nodes there. Another thing would be the engine textures- They look a bit plain and everything is just white/grey/color of the head cover. I'll write more things as a PM -
Y10fire3949
- 5/5,
Very good mod. Yes, the handbrake doesn't work and engines tend to overheat quite quickly, but that's just something that makes it more realistic! Just one thing to fix: when fenders get damaged headlights tend to get deformed in an unrealistic way. Overall, excellent job!
-
The-Old-twingo
- 5/5,
Neat car. Just wandering. Whats that red car next to it. That 80s looking one.
-
-
-
iRetr0x
- 5/5,
Literally the best fucking car ever I’m linking this shit with all my beamng friends. The handling is PERFECT do not fuck with it it’s so fucking perfect I LOVE IT! For anyone reading this, download this shit RIGHT NOW
-
Author's Response
Lmao f bomber but seems you got satisfied :D
-
The mad driver
- 5/5,
try to make something like a rolls royce like a variation with V10 or a V12
-
Author's Response
Smol car big planee engine
But i think it will fit with the car like sd1
-
vuurkoning1
- 5/5,
If you take the rally version, and clutchdrop it the front wheels EXPLODE. dont remove this feature please
-
DangerDean
- 5/5,
Even though I love the car, but the race model is basically a jelly car
-
-
-
Mullayho
- 3/5,
The model is awesom, but it doesn't work as intended yet. The handbreak wasn't working and the front suspension glitched and exploded
-
Author's Response
I am finding an expert for this issue and i will remove this issue i promise cuz many others said like that
Page 2 of 4