Serpentine Couleuvre 276HP 2.0

this Pack of Cars contains 2 cars of 276HP, 1 track and 1 offroad, and an extra car of about 220HP, the last one is a copy of the offroad one but buildable in Automation since it will not take like 5000 months of research...

if you enter a rally track with the offroad one, it does a pretty decent job.

the track version is very nimble and stable due to it's AWD disposition but it is split with 80% rear and 20% front torque split.

the Limited Slip is Edited by Hand for the Offroad ones to be around 70% locked to have all wheels spinning and rock crawl if you ever end up that crazy!

i totally guessed what kind of suspension needs a rally car had so i put medium hardness on springs and exaggerated dampening in the suspension setup in Automation.

----UPDATE---

this new update gives it Custom ESC (tho it does not need as much as some other cars i made.) and i changed the Suspension settings for the Offroad Rally ones. the LSD is a bit tweaked as well...

other than that i did some Google search and found that most Rally are done on an average of 130 km/h (80mph) so if you jump above those speeds it "would" be normal to lose control... i did not know that and tried to make it more stable for a while now. so the ESC helps a bit in those situations plus unlike standard ESC, it does not kill the throttle, it only reduce it to give it a bit more traction. (still spinning of course since a Rally car needs to spin!)

other than that i changed the Idle RPM and tried to make the shifts faster. but aside from the handling, it looks exactly the same. hope you guys like it! (if not then you can always try to message me and give me tips!