Alpha Xpogosam's Personal Parts Pack (X3P) Release 2023.0

Welcome to XPPS!​

​

Over the past year of working on my publicly released mods, I have been quietly building up a folder of personal projects. Until about a month and a half ago, I had no intention of releasing these projects as they were either too niche or small to warrant their own mods, or they were incomplete. However, I decided as a celebration of 1 year of modding to make the parts public, as a thank you to those who have downloaded, used, and enjoyed my work over the past year. There are no real big projects in here but there are a large variety of high quality parts that I made for my own enjoyment, and maybe you'll enjoy them too!


This mod will also be fully absorbing and updating 5 of my smaller mods. Those mods will no longer be supported on their respective pages and will be supported through here. The mods affected are as follows:

Spoiler: Absorbed Portfolio

• 
  
  
  • Bolide Supercharger
  • Stage 3 Diesel Turbo for Stambecco
  • No Flash DSE for Scintilla
  • Scintilla Supercharger
  • GRP cone filter for covet

If you have any of these mods, you can remove them from your repo for slimming purposes and to ensure you have no duplicates.

---

Hirochi Aurata

Aesthetics:

-Two types of Clear tail lights:

• The first thing I noticed on the Aurata, was the red lens vanilla tail lights. To me, they looked cartoonish and cheap which on a side by side works I guess but I disliked them instantly, and made the version with the clear lens within an hour of the Auratas release. The full clear tails followed later that day and I have been waiting for a reason to post them and here we are.

​

-HID Headlights:

​

• Brighter (Duh) and with a more white/blue hue (as seen relative to the warmth on the fog lights)

• Side reflectors deleted

-Rear Fenders with deleted reflector:

​

-"Yes Texture" Flag:

• Inverted version of the vanilla "No Texture" Flag because I thought it was funny. "The Duality of Man"

​

Performance

-6 Speed Dual Clutch Transmisison

• uses close gear ratios from the Honda P1000 ATV

-"Street" CVT Clutches

• significantly reduced rev hang

• increased max torque over race clutches

• drives way, way, way better than the vanilla clutches, to the point that I actually prefer the CVT over the dual clutch above now

-XTS- 0.84-LRT Turbocharger

​

• Xpogosam Turbine Solutions "Low Range Torque" (0.84 describes the size class)

• Hybridized Hirochi Sunburst S turbo with quick spool for low end efficiency to make usable low end torque from the Auratas 900cc I3. You can see above in the chart how the XTS-LRT shines most with midrange.

• Makes a significant amount of torque more than any of the vanilla options (use with street clutches and vanilla heavy duty long block)

​

---

Tiltbed Trailer

​

-Aftermarket Hydraulic Pump

• Dead silent because oh my god that sound was driving me insane
• Beefed up, faster pump stats:

​

• Exponentially faster than the stock and heavy duty hydraulic pumps, taking just 6.5 to 11.0 seconds to go from rest to ground depending on trailer length/weight

---

GLOWBOX:

​

• Prop I created to be a light source while working on mods.
• Is it pretty? Beautify is subjective.
• Does it work? Yes, that is objective
• Lowbeams are cool hue, highbeams are warm hue
• Amount of light is variable via tuning menu

---

Ibishu Pessima 2nd Gen

-Clear Tail lights

​

-Clear Headlights (also HID fog lights to match HID headlights

​

---

Bruckel Bastion:

Aesthetics:

-Black Lettering:

• Black versions of every possible badge on the car

​

-Modular Rear Bumper and Modular Trunk

• Makes some things parts of slots that were not previously
• modular rear bumper opens up the rear vents and has 3 options for rear reflector deletes (clear, blank, mesh)
• Modular trunk allows for center tail light and CHMSL to be modified (see below )

​

-Glowmap Reflasher:

• Allows for personalization of the glowmaps for the gauges and more
• tie gauge faces to engine ignition state, no need to turn on headlights to see faces clearly
  • make sure to select the option that matches the installed faces for proper compatibility
• Activate european rear DRL.
  • turns the tail light to a running light
• Configurable marker lights
  • Options for Parking, Running, and fully deactivated marker

• Undercover emergency light mode
  • Custom flash patern by me

​

-Clear Tail Lights

• Credit to dreaM^_ for the original idea, although his were not seemless and did function fully, they were purly for pictures only. This fixes that. Did them from scratch, perfect blend of smoked and clear aesthetic. Fully glowmaped and includes the broken glass textures too. Perfectly seemless!

​

Performance:

-Aftermarket Radiator:

• GRP model with functional fans
• much higher performance, can handle the larger supercharged engines more effectively

-Non-Resonated midpipe

• Both mid resonators fully removed
• sound adjusted accordingly, more volume and rasp
• compatible with V8 and V6

{insert pic here}​

-Titanium Full Exhaust

• Full headerback titanium exhaust with titanium midpipe, titanium DREID mufflers, and titanium back box deletes with selectable exhaust tips
• a little bit rough if im honest but it sounds great and weighs less which is always good

*placeholder picture of my ETK800 titanium exhaust from HMT, the bastion one looks very similar
​

-TCU tune

• 8 speed automatic with adjusted shiftlogic with values from HMT and Arsenic Werks
• Not super optimized but significantly improved

---

Civetta Scintilla:

Performance
- Stage 1 Supercharger:

• Ported from my Scintilla Supercharger Mod
  
• Gains up to 276hp and 220lbft over stock
• Lore wise, meant as a drop in power solution, more easily reversible and less invasive than a turbocharger system

- Stage 2 Supercharger:

• Next step beyond the stage 1 supercharger
• Gains up to ___hp and ___ over stock
• ________________

​

-No Flash Drive Modes:

• Ported from my No Flash DSE for scintilla mod
  
• Removes Brake light flashing in all modes
  
• Quieter exhaust in street mode
• Switched around some gauge display options with the displays that I felt made more sense for each mode
  • renamed "Strada" as "street" because it always confused me and the internal name within the jbeam was actually "street" not strada.

-Low Adaptive Axle-Lift Coilovers

• Axle Lift coilovers with more ride height adjustment and more lift capability, enjoy a closed wheel gap, and clearance when needed

-7 Speed DCT w/ Transmission Tune

• Ported from my Scintilla Supercharger Mod
• Improved shiftlogic with smart aggression calculation

Aesthetic :

-Clear reverse light reflectors for non-performance bumper

• the only reflector not available in vanilla with a clear version for some reason, so I fixed it

​

Civetta Bolide:

Performance:

-Stage 1 Supercharger

• Ported from my Bolide Supercharger mod, Runs 10.6 psi and bumps power up by about 30%, providing a smooth, linear torque curve and an addicting sound
• Remodeled by @Angry_Bird a few months back (thank you) and uses the factory air boxes and ducting

​

-Bastion 5.7L Engine Swap

• Did your Bolide engine use a rod to punch an itialian shaped window in its block? Does your 80s mid engine coupe with a linear power band need a boat load of torque to mess with chassis dynamics? Look no further.
• Partially complete project, simply just the engine and the standard naturally aspirated intake. Incomplete, but fun and functional. good for a reliable track rat.

​

-Smokeless Turbo and Non-turbo exhausts

• Use the race exhaust sound presets with the standard and GTT style exhausts
• Removed particulates because while emmisions were a joke in the 80s, theres no reason a gasoline powered car should roll that much coal lol

-6 Speed Manual:

• Ported from my Bolide Supercharger mod.
• Quick Shifts, close ratio, and a 6th gear, make sure to install the 6 speed shifter as well

---

Ibishu Covet:

-GRP filter for covet turbos

• Absorption of my old GRP filter for covet mod.
• Replaces low poly blue covet filter with the newer Generic Racing Parts filter.
• Options for normal and headlight intake

​

the following parts were created while I built a budget track car out of a base covet. I started with vanilla parts, and worked up with what made sense on a budget for a dedicated track car


-Digital Race Dash

• Generic race dash (borrowed positioning from Tsukatan) with a custom carbon fiber blanking plate over the original gauge cluster hole

​

-Aluminum Race Radiator

• More volume, more efficient, and an attractive GRP model.

​

-Janky Performance Intake:

• Fabricated on a budget for the 1.6 SOHC engine. GRP Filter, kinda rusty 3ish inch intake piping, and a custom modeled heat shield
• Loads of intake noise, rather similar to the ITB sound
• Solid power gains of 22hp

​

-Standalone ECU

• Adds extra configuration over race ecu
  • Rev Limiter RPM
  • Rev Limiter Cut time
  • idle rpm
• slot option for radiator fan override (ties radiator fan to ignition level
• Adds idle roughness and idle rev-up on start

-License plate fill panel for cut bumper

• deletes the rear plate adding a smooth ABS plastic delete panel for the cut bumper

​

-Modular Track Brakes

• Mid-step before the race brakes with fully configurable caliper color and rotor choices. 4-pot calipers front, large single in rear
• Choose between drilled and slotted rotors
• Choose between Plain, Red, Blue, and Yellow rotopad calipers
• Front and rear calipers have a slight rake to them because why not

​

---

Autobello Stambecco:

- Absorbed my old "Stage 3 Turbo for Stambecco" mod

• Takes the Stage 3 turbo from the 6.0L Diesel V8 from Gavril and adapts it to the Stambeccos 2.8L water cooled Diesel i6.
• Slightly adjusted the Turbochargers behavior from the orignial version

-Custom Exhaust

• Custom modeled with a much smaller muffler and slightly nicer piping.
• Turn-downish side exit
• Doesn't blow particulates at idle but does on throttle.

​

-6 Speed Automatic transmission

• also ported from D series diesel
• Improves driving dynamics a good bit IMO
  • for more adjustability over its behavior and gears, see my mod "Gear Commander"
• includes automatic column shifter
  • non-functional but better than nothing

Soliad Lansdale:

​

• Tailgate glass with wiper delete
• Shaved rear tailgate handle with no logo
  • available in black and paint matched
• Glowmap Reflasher
  • Installs in shift light slot
  • ties interior illumination to ignition state aka the interior lighting is always on if the ignition is on, making it easier to see.

---

Spoiler: Austens Parts Pack Patch

On an unrelated note, I patched Austens Parts Pack to work with the most recent updates, fixing the bed liner beds and the late interior with split console on the Gavril D series, redoing the green and blue moonhawk interiors in PBR, fixing the H series hoods, as well as deleting the hatch and etk800 folder as either the folder or the contents are outdated. You can see the post on his thread here:

https://www.beamng.com/threads/austen’s-parts-pack.81831/page-4

or download it off my google drive here:

https://drive.google.com/file/d/14vtlDkweoTwr3YeQpHvdOgFPbymCjp-V/view?usp=drive_link