Rewritten for update 0.31 1. A small dump trailer(has sides), possibly using the tilt deck trailer as a base(allows it to be used on gooseneck and conventional tow hitches). This could be used for transporting props or smashed cars without securing them to a trailer/truck bed. 2. A utility body version of the Hirochi Atura - with stiffer suspension, locking rear differential, and tow hitch for towing small trailers. A diesel 4-seat one is an idea. 3. A small dump bed for the Gavril D series with high, low, and possibly no sides. It may be possible to merge the rollback car hauler and flatbed somehow. This should not make the receiver hitch unusable. Search landscape dump truck and drop side dump truck. 4. A gooseneck coupler and fifth wheel for the D series flatbed in addition to a long wide(for drw) flatbed. The former could be implemented by having the gooseneck and fifth wheel located under one of the chassis options(so you can also use the hitch without a bed). 5. Some sort of tractor setup with a rear 3-point hitch and front loader. The front loader implements may be a bucket, pallet forks, and a grapple. The rear 3-point hitch could have any number of implements for destroying vehicles or for later use in career mode. The rear 3-point hitch could be swapped for a backhoe or the backhoe could be a separate "vehicle" that attaches either via the 3-point or a subframe. Playing around with a multi-range hydrostatic transmission may be fun for some in addition to a gear transmission(synchronized and unsynchronized). The tractor(s) should at least have the option for 4wd/awd/mfwd(whatever you want to call it) and locking differentials. Depending on the size of the tractor, it could have a diesel or turbodiesel engine or just a gas engine(if it is small, less than 25hp). If vehicle-capable terrain editing is implemented, some of the implements used could dig holes and bury cars. Even if this is never implemented, props could be loaded and destroyed along with vehicles. 6. A crane addition to the t series or d series. This can be a smaller truck-mounted crane for the T series(search digger derrick on Google for my idea) or a bigger truck-mounted crane. The crane could have the option for some sort of grapple for grappling props or cars depending on what style is made. 7. A no-side option for the large box utility trailer or ramps for the tilt deck trailer. A deck-over trailer could suffice. 8. An offroad-ish forklift. 9. A simple rolloff dumpster for hauling cars, car parts, and props.(The tailgate design on the frameless dump trailer does not allow most vehicles to fit through unless they are really smashed.)
