BANANA Benchmark Results Comparison

Discussion in 'General Discussion' started by garyjpaterson, Jun 23, 2014.

  1. MouthAction

    MouthAction
    Expand Collapse

    Joined:
    May 15, 2017
    Messages:
    19
    Stock cpu. Ram at 3333Mhz
     

    Attached Files:

    • bananabench2700x.png
    • bananabench2700x.png
    • bananabench2700x.png
  2. SHOme1289

    SHOme1289
    Expand Collapse

    Joined:
    Nov 6, 2013
    Messages:
    1,313
    how would an i7-6700k do with beamng? not sure if anyone has one/has tried the banana in a while with one. I can get one right now but need to know if its a good upgrade from an i3-6100
     
  3. TechnicolorDalek

    TechnicolorDalek
    Expand Collapse

    Joined:
    Dec 6, 2013
    Messages:
    957
    The i7-6700k is basically just an i3-6100 with slightly higher clock speeds and twice as many cores.

    You can run more vehicles, but your performance at 1 vehicle shouldn't significantly change.
     
  4. fufsgfen

    fufsgfen
    Expand Collapse

    Joined:
    Jan 10, 2017
    Messages:
    6,788
    Yeah, but there is overclocking, which with 6700k is pretty much at same line as anything that has come after it. Running at 4.8Ghz will give significiant boost over i3-6100.

    Also my 1 car result is 40Mbeams/s with i7-6700 non K model, that is 4Ghz at tops (something between 3.8-4.0 most likely), with all cores loaded I get 3.7Ghz, with 4.8Ghz overclocked 6700k would be a massive upgrade, 8th and 9th gen have too many cores and heat issues prevent them to reach clocks which those could reach otherwise.

    That is why I would think 6700k would be best upgrade from i3-6100, no point really getting 8th or 9th gen as those won't do any better as at least for now BeamNG will be single core limited so quickly, that is what I found out with 8086k, single core just is not going enough high to not be a bottleneck for other 11 threads.

    For the money (at least prices which I have seen locally) 4790k and 6700k are the best, 8600k if one needs 8th gen as those extra cores just won't help so much, also if one has already z170 or z270 motherboard, then upgrade to 6700k gives all the performance one can have at the moment.

    In a future of course 8th gen or 9th gen might do better, or Ryzen or upcoming new Zen, depends how well developers can lower CPU bottleneck of the game, but as Nadeox posted single threaded engine is considered good for them, it is likely one will need very fast single core cpu in future too.

    I'm so much between the two myself, to get better motherboard and run 8086k or to get 6700k which would be win8 compatible and also run faster in practice, but then I would give out 4 threads and if lower single core would do in future, then those extra threads would be useful.

    So I try to wait and see, which is easy when I don't have money for other upgrades for a while :D
     
  5. SHOme1289

    SHOme1289
    Expand Collapse

    Joined:
    Nov 6, 2013
    Messages:
    1,313
    I am winging it and I found a 1060 5 gig dual fan for 75 bucks on ebay, gonna throw it in when I get it and see if it works...and before you say "there is no 5 gig, just 3 and 6 gig", these cards were available in china and are pretty cheaply made. That being said, before I drop like 400 bucks on a legit brand new card, ill see if a better gfx card would boost my fps. I am pretty happy currently with the i3, so that is gonna stay in place for a while. I might sell the 1050Ti, if anyone wants it shoot me a PM and an offer. happy to ship worldwide.
    --- Post updated ---
    https://linustechtips.com/main/topic/930382-cheap-aliexpress-graphics-cards-scam/

    this is linus testing one out he found on AliExpress. I am not too scared, actually more curious to see if the 5 gig 1060 chinese one is at least close/comparable to a full on 6 gig version.
    --- Post updated ---
    and as far as my specific upgrade question about the CPU, my MoBo (MSI Mortar Arctic B150M) supports Skylake processors, so I narrowed it down to either the i5-6600K or i7 6700K.
     
  6. fufsgfen

    fufsgfen
    Expand Collapse

    Joined:
    Jan 10, 2017
    Messages:
    6,788
    That is fake, it is no 1060, can't remember what it was really, but it is not a 1060.

    B150M might not allow overclocking, check that first, but I think it was higher end models like H and Z that allowed overclocking?
     
  7. SHOme1289

    SHOme1289
    Expand Collapse

    Joined:
    Nov 6, 2013
    Messages:
    1,313
    i dunno, based on a ton of research, its a 1060 with a few memory chips removed, mass produced for the chinese game cafe market.
    --- Post updated ---
    shows up as a 1060 in device manager and performs well in benchmarks so, fuck it, for 75 bucks ill throw it away if it sucks, I still have ol reliable 1050 lol
    --- Post updated ---
    ehh, im not really even that interested in overclocking, I just like the fact that the chip is like 4.0gHz out of the box and snapped in place.
     
  8. fufsgfen

    fufsgfen
    Expand Collapse

    Joined:
    Jan 10, 2017
    Messages:
    6,788
    Well it is not too much and you can sell it out for 50 bucks no matter if it would be 1050Ti, I mean 1050Ti costs more than that used :D

    Yeah, 4Ghz is already nice boost as it is on all cores and your 2 cores with HT is bit slower as BeamNG uses more than 2 threads so there is difference.

    With 2-3 vehicles there is going to be clear difference already.

    When you get CPU, you can do comparison, this CPU of mine is pretty fast for a non K model:
    https://www.beamng.com/threads/banana-benchmark-results-comparison.8595/page-44#post-911075
     
  9. SHOme1289

    SHOme1289
    Expand Collapse

    Joined:
    Nov 6, 2013
    Messages:
    1,313
    one question I am not sure about, on MSI's website it says my MoBo "supports Skylake processors"...does that mean I am stuck to just Skylake or could I pop a newer gen intel processor? as long as it's LGA1151? or im stuck with skylake? (not really a bad thing, I am noticing that the Skylake CPU's are still going for pretty much full retail, 300 - 400 bucks)
     
  10. fufsgfen

    fufsgfen
    Expand Collapse

    Joined:
    Jan 10, 2017
    Messages:
    6,788
    In theory 7th gen might work, if there is bios upgrade that supports it, but anything newer is a no go. If there is no Bios update to support 7th gen (Kaby Lake) then only Skylake is possible.
     
  11. SHOme1289

    SHOme1289
    Expand Collapse

    Joined:
    Nov 6, 2013
    Messages:
    1,313
  12. DirtyGod^

    DirtyGod^
    Expand Collapse

    Joined:
    Dec 18, 2016
    Messages:
    4
    ok so I just did this with my setup. 8700k oc to 5.0 ghz and a gtx 1080ti
     

    Attached Files:

    • beambench.png
  13. Trin32

    Trin32
    Expand Collapse

    Joined:
    Jun 13, 2014
    Messages:
    38
    So here's i7-8750H with dual-channel 2666MHz CL19 : 211.924 Mbeams/s (keeps stable 3.90 GHz)
    i5-4440 with dual-channel 1600MHz CL9 memory: 98.220 Mbeams/s (3.10 GHz)
     

    Attached Files:

    • 4vaIqso-Imgur.png
    • 0i2FNWz-Imgur.png
    #913 Trin32, Dec 21, 2018
    Last edited: Dec 21, 2018
  14. Jaime Palmer

    Jaime Palmer
    Expand Collapse

    Joined:
    Apr 1, 2017
    Messages:
    68
    Hey, I have my system as I bought it, I'm not into oc, so my specs are Ryzen 5 1600 and GTX1080 MSI (Does the graphic card does something in this test?)
    Cheers.
    upload_2018-12-21_16-57-11.png
     
  15. MouthAction

    MouthAction
    Expand Collapse

    Joined:
    May 15, 2017
    Messages:
    19
    updated
    still stock cpu but with a AIO, memory timings have been optimized as well(still 3333mhz)
     

    Attached Files:

    • bananawc.png
  16. Adrian_fr97

    Adrian_fr97
    Expand Collapse

    Joined:
    Aug 24, 2013
    Messages:
    7
    on my side, Beamng is kind of laggy with my air cooled Ryzen (2300mhz Ram, be quiet shadow rock 2 cooler)
    Bananaatest.png
    new RAM on my side and stock clock, i have got more Mbeams/s
    Unbenannt.png
     
    #916 Adrian_fr97, Dec 26, 2018
    Last edited: Jan 30, 2019
  17. fufsgfen

    fufsgfen
    Expand Collapse

    Joined:
    Jan 10, 2017
    Messages:
    6,788
    Your single car (single core) result is quite a lot weaker than MouthAction's score, I wonder if it is just memory speed or if there is even something more to it, hopefully you can find some way to improve that as such is definitely lowering FPS in BeamNG.
     
  18. PabloMM

    PabloMM
    Expand Collapse

    Joined:
    Aug 13, 2017
    Messages:
    339
    BeamNG 0.13.0.5 --> BeamNGv01305.png


    BeamNG 0.14.0.3 --> BeamNGv01403.png


    BeamNG 0.15.0.2 -->
    BeamNGv01502.png
     
    • Like Like x 1
  19. MouthAction

    MouthAction
    Expand Collapse

    Joined:
    May 15, 2017
    Messages:
    19
    I ran a test with my memory at 2400mhz and got this. I also did a 4.2Ghz(4190Hz) run and got that. I have to say the turbo functionality on second gen Ryzen makes manual overclocking more of a hobby than anything. I'm also including my old FX8320, for the lols.
     

    Attached Files:

    • bana4200.png
    • bana2400mem.png
    • bananbench.png
  20. Masterjoc

    Masterjoc
    Expand Collapse

    Joined:
    Aug 4, 2013
    Messages:
    282
    i7 8750H Single RAM 16GB 2400:


    With latest update i see big plus.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice