Unsolved Collision problems

MRcrash · Nov 2, 2016

Lots of objects are clipping into the shovel when I try to pick up them. Is it possible to fix it?

CreasingCurve · Nov 2, 2016

Does this happen when you try to drive straight into it when the shovel is a ground level or does it happen when you manually place the props slightly above the coltri and it goes through like the picture you provided.

MRcrash · Nov 3, 2016

Usually when I

Darren9 said: ↑

There's a couple of things you can try. Put about 10 or 20 nodes along the bottom front edge of the bucket so that narrow things can't get between them (I'd make a slide rail and space the slide nodes along it with stiff beams between them instead of trying to make it 3d rigid with hundreds of beams). Or, continue the front of the bucket forward and down a bit further with some non-colliding invisible nodes with triangles so when the bucket is on or near the ground there's a bit that goes just under the ground that scoops up the nodes of other objects that are resting flat on the ground. Probably both together would be most effective.
Click to expand...

Thank you. That sounds like a good solution. I will try it.

torsion · Nov 4, 2016

Good suggestions @Darren9, I wouldn't have thought of using slide nodes that way!

Forums

Mods

Unsolved Collision problems

MRcrash
Expand Collapse

BeamNG Team

CreasingCurve
Expand Collapse

MRcrash
Expand Collapse

BeamNG Team

torsion
Expand Collapse

Useful Searches

Unsolved Collision problems

MRcrash Expand Collapse BeamNG Team

CreasingCurve Expand Collapse

MRcrash Expand Collapse BeamNG Team

torsion Expand Collapse

MRcrash
Expand Collapse

BeamNG Team

CreasingCurve
Expand Collapse

MRcrash
Expand Collapse

BeamNG Team

torsion
Expand Collapse