Please use this thread as a way to report bugs for this mod: https://beamng.com/resources/16782/ Also feel free to suggest possible features here .
Oh, now this is nice! A place where I can leave my crazy ideas without feeling like I'm abusing the rating and review system. Well, I'll re-submit the one I had in the last review, plus a few other good bits of crazy from time to time, now that I know this is here. Of course, as always, I have no clue if any of these are possible, I'm just tossing ideas out to see if any of them can be done. Covet body on a Pigeon frame. I'd love to see the wheel arches covered up front with the Burnside's wheel skirts, but if it's not possible, I'll accept that. Miramar upscaled to fit on a Grand Marshal frame? Covet engines for the Pigeon. Also, Pigeon engines for the Covet, D-Series, Grand Marshal? Covet engines for them? JATO in the back of the Covet, sticking out of where the rear window should be. Bed loads using Pigeon/Covet/Miramar bodies? Double-Decker cars? D-Series Front Push Bumper for everyone?
I've already tried merging a covet body with a pigeon frame, I wasn't able to get it working for some reason. I won't do all of your ideas, but some of them are really something I wanna try. I added those to the list. Also, scaling a full body doesn't turn out very really well, especially when the interior is scaled aswell. So I won't be doing that
Had a couple of ideas come up while making something to eat earlier. D-Series bed-caps for the Pigeon (as you've done a Pigeon bed for the D-Series and made a D-Series flat-cap fit the Pigeon's bed. Would be nice to have something with windows back there on the tippy trike.) Junker engines with blown piston rings for the cars with beater/derby skins? I know a few mods exist to do the same, but most of them seem to blow the head-gasket instead, which creates a plume of smoke right in front of the windshield, which ruins visibility. At least blown piston rings makes smoke out of the exhaust. Tall exhaust stacks for the Derby Cars? Also, possibly Stupidly Tall exhaust stacks for the Derby Cars? Not sure if this is doable or not, but 6-wheeled versions of some vehicles? I think I've seen one before for the Moonhawk, but I don't know if that's something you're interested in doing or able to do. If it is something you're able and interested in doing, I'd most want to see the H-Series van, the LeGran (because that's my Beam Daily), the D-Series truck, and the Covet (because, let's face it, who doesn't want a 6-wheeled Covet?). Stupidly-Tall spoilers? Although, maybe keeping them low enough to go under most overpasses would make sense... Or just a second version. Backwards Rims? (Most have the dish to the inside, these have the dish to the outside, like the outer set of tires on a dually.)
@DaddelZeit use this jbeam for the "12.1x7" rear wheels on the pigeon it fixes the rear right wheel being inside out. { "pigeon_wheel_R_bigger": { "information":{ "authors":"BeamNG", "name":"12.1x7 Rear Steel Wheels", "value":100, } "slotType" : "pigeon_wheel_R", "flexbodies": [ ["mesh", "[group]:", "nonFlexMaterials"], //rear wheels ["steelwheel_07a_12x5", ["wheel_RR","wheelhub_RR"], [], {"pos":{"x":-0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":180}, "scale":{"x":1.31, "y":1.05, "z":1.05}}], ["steelwheel_07a_12x5", ["wheel_RL","wheelhub_RL"], [], {"pos":{"x":0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":0}, "scale":{"x":1.31, "y":1.05, "z":1.05}}], ["tire_01a_12x5_19", ["wheel_RR","tire_RR"], [], {"pos":{"x":-0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":0}, "scale":{"x":1.3, "y":1.05, "z":1.05}}], ["tire_01a_12x5_19", ["wheel_RL","tire_RL"], [], {"pos":{"x": 0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":0}, "scale":{"x":1.3, "y":1.05, "z":1.05}}], ], "powertrain" : [ ["type", "name", "inputName", "inputIndex"], ["shaft", "wheelaxleRL", "differential_R", 1, {"connectedWheel":"RL", "breakTriggerBeam":"axle_RL", "uiName":"Rear Left Axle", "friction":1.5}], ["shaft", "wheelaxleRR", "differential_R", 2, {"connectedWheel":"RR", "breakTriggerBeam":"axle_RR", "uiName":"Rear Right Axle", "friction":1.5}], ], "nodes": [ ["id", "posX", "posY", "posZ"], //--REAR LIVE AXLE SUSPENSION-- {"frictionCoef":0.5}, {"nodeMaterial":"|NM_METAL"}, {"nodeWeight":2.75}, {"selfCollision":true} {"collision":false} {"group":"wheelhub_RR"}, ["ax1r", -0.445, 1.01, 0.23], {"group":"wheelhub_RL"}, ["ax1l", 0.445, 1.01, 0.23], {"collision":true} //wheel nodes {"group":"wheelhub_RR"}, ["axwr", -0.65, 1.01, 0.23], {"group":"wheelhub_RL"}, ["axwl", 0.65, 1.01, 0.23], {"group":""}, ], "beams": [ ["id1:", "id2:"], //--REAR WHEELS-- {"beamPrecompression":1, "beamType":"|NORMAL", "beamLongBound":1.0, "beamShortBound":1.0}, {"beamSpring":371000, "beamDamp":3}, {"beamDeform":75000,"beamStrength":360000}, ["ax1r","axwr"], ["ax1l","axwl"], {"beamPrecompression":1, "beamType":"|NORMAL", "beamLongBound":1.0, "beamShortBound":1.0}, ], "variables": [ ["name", "type", "unit", "category", "default", "min", "max", "title", "description"] ["$tirepressure_R", "range", "psi", "Wheels", 25 0, 50, "Rear Tire Pressure", "Relative to atmospheric pressure"] ], "pressureWheels": [ ["name","hubGroup","group","node1:","node2:","nodeS","nodeArm:","wheelDir"], {"disableMeshBreaking":false,"disableHubMeshBreaking":false}, {"hasTire":true}, {"enableTireReinfBeams":false}, {"enableTireLbeams":true}, {"enableTireSideReinfBeams":false}, {"enableTreadReinfBeams":true}, {"enableTirePeripheryReinfBeams":true}, //general settings {"radius":0.25}, {"hubRadius":0.18}, {"wheelOffset":0.06}, {"hubWidth":0.165}, {"tireWidth":0.15}, {"numRays":14}, //hub options {"hubTreadBeamSpring":701000, "hubTreadBeamDamp":4}, {"hubPeripheryBeamSpring":701000, "hubPeripheryBeamDamp":4}, {"hubSideBeamSpring":901000, "hubSideBeamDamp":4}, {"hubNodeWeight":0.3}, {"hubNodeMaterial":"|NM_METAL"}, {"hubFrictionCoef":0.5}, //tire options {"wheelSideBeamSpring":2100,"wheelSideBeamDamp":5}, {"wheelSideBeamSpringExpansion":251000,"wheelSideBeamDampExpansion":20}, {"wheelSideTransitionZone":0.08,"wheelSideBeamPrecompression":0.99}, {"wheelReinfBeamSpring":15000,"wheelReinfBeamDamp":145}, {"wheelReinfBeamDampCutoffHz":500,"wheelReinfBeamPrecompression":0.99}, {"wheelTreadBeamSpring":121000,"wheelTreadBeamDamp":44}, {"wheelTreadBeamDampCutoffHz":500,"wheelTreadBeamPrecompression":0.99}, {"wheelTreadReinfBeamSpring":121000,"wheelTreadReinfBeamDamp":44}, {"wheelTreadReinfBeamDampCutoffHz":500,"wheelTreadReinfBeamPrecompression":0.99}, {"wheelPeripheryBeamSpring":101000,"wheelPeripheryBeamDamp":22}, {"wheelPeripheryBeamDampCutoffHz":500,"wheelPeripheryBeamPrecompression":1}, {"wheelPeripheryReinfBeamSpring":51000,"wheelPeripheryReinfBeamDamp":22}, {"wheelPeripheryReinfBeamDampCutoffHz":500,"wheelPeripheryReinfBeamPrecompression":1}, //general tire values {"nodeWeight":0.09}, {"nodeMaterial":"|NM_RUBBER"}, {"triangleCollision":false}, {"pressurePSI":"$tirepressure_R"}, {"dragCoef":5}, //groundmodel friction multipliers {"frictionCoef":1.2}, {"slidingFrictionCoef":1.0}, {"treadCoef":0.6}, //advanced friction values {"noLoadCoef":1.34}, {"loadSensitivitySlope":0.0002} {"fullLoadCoef":0.35}, {"softnessCoef":0.7}, //deform values {"wheelSideBeamDeform":4600,"wheelSideBeamStrength":6000}, {"wheelReinfBeamDeform":4600,"wheelReinfBeamStrength":6000}, {"wheelTreadBeamDeform":5500,"wheelTreadBeamStrength":7000}, {"wheelPeripheryBeamDeform":5500,"wheelPeripheryBeamStrength":7000}, {"wheelSideReinfBeamDeform":4600,"wheelSideReinfBeamStrength":6000}, //deform values {"wheelSideBeamDeform":11000,"wheelSideBeamStrength":14000}, {"wheelReinfBeamDeform":101000,"wheelReinfBeamStrength":101000}, {"wheelTreadBeamDeform":8100,"wheelTreadBeamStrength":11000}, {"wheelTreadReinfBeamDeform":8100,"wheelTreadReinfBeamStrength":11000}, {"wheelPeripheryBeamDeform":101000,"wheelPeripheryBeamStrength":101000}, {"hubBeamDeform":14000, "hubBeamStrength":88000}, //rear {"selfCollision":false} {"collision":true} {"axleBeams":["axle_RL"]} ["RL", "wheel_RL", "tire_RL", "ax1l", "axwl", 9999, "ax3l", 1, {"torqueCoupling:":"ax2", "torqueArm:":"ax3"}] {"axleBeams":["axle_RR"]} ["RR", "wheel_RR", "tire_RR", "ax1r", "axwr", 9999, "ax3r", -1, {"torqueCoupling:":"ax2", "torqueArm:":"ax3"}], {"selfCollision":true} {"axleBeams":[]},{"disableMeshBreaking":false,"disableTriangleBreaking":false} ], "triangles": [ ["id1:","id2:","id3:"], ], }, "pigeon_wheel_R_bigger_grip": { "information":{ "authors":"BeamNG", "name":"Grippy Drag 12.1x7 Rear Steel Wheels", "value":100, } "slotType" : "pigeon_wheel_R", "flexbodies": [ ["mesh", "[group]:", "nonFlexMaterials"], //rear wheels ["steelwheel_07a_12x5", ["wheel_RR","wheelhub_RR"], [], {"pos":{"x":-0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":180}, "scale":{"x":1.31, "y":1.05, "z":1.05}}], ["steelwheel_07a_12x5", ["wheel_RL","wheelhub_RL"], [], {"pos":{"x":0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":0}, "scale":{"x":1.31, "y":1.05, "z":1.05}}], ["tire_01a_12x5_19", ["wheel_RR","tire_RR"], [], {"pos":{"x":-0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":0}, "scale":{"x":1.3, "y":1.05, "z":1.05}}], ["tire_01a_12x5_19", ["wheel_RL","tire_RL"], [], {"pos":{"x": 0.61, "y":1.01, "z":0.23}, "rot":{"x":0, "y":0, "z":0}, "scale":{"x":1.3, "y":1.05, "z":1.05}}], ], "powertrain" : [ ["type", "name", "inputName", "inputIndex"], ["shaft", "wheelaxleRL", "differential_R", 1, {"connectedWheel":"RL", "breakTriggerBeam":"axle_RL", "uiName":"Rear Left Axle", "friction":1.5}], ["shaft", "wheelaxleRR", "differential_R", 2, {"connectedWheel":"RR", "breakTriggerBeam":"axle_RR", "uiName":"Rear Right Axle", "friction":1.5}], ], "nodes": [ ["id", "posX", "posY", "posZ"], //--REAR LIVE AXLE SUSPENSION-- {"frictionCoef":0.5}, {"nodeMaterial":"|NM_METAL"}, {"nodeWeight":2.75}, {"selfCollision":true} {"collision":false} {"group":"wheelhub_RR"}, ["ax1r", -0.445, 1.01, 0.23], {"group":"wheelhub_RL"}, ["ax1l", 0.445, 1.01, 0.23], {"collision":true} //wheel nodes {"group":"wheelhub_RR"}, ["axwr", -0.65, 1.01, 0.23], {"group":"wheelhub_RL"}, ["axwl", 0.65, 1.01, 0.23], {"group":""}, ], "beams": [ ["id1:", "id2:"], //--REAR WHEELS-- {"beamPrecompression":1, "beamType":"|NORMAL", "beamLongBound":1.0, "beamShortBound":1.0}, {"beamSpring":371000, "beamDamp":3}, {"beamDeform":75000,"beamStrength":360000}, ["ax1r","axwr"], ["ax1l","axwl"], {"beamPrecompression":1, "beamType":"|NORMAL", "beamLongBound":1.0, "beamShortBound":1.0}, ], "variables": [ ["name", "type", "unit", "category", "default", "min", "max", "title", "description"] ["$tirepressure_R", "range", "psi", "Wheels", 25 0, 50, "Rear Tire Pressure", "Relative to atmospheric pressure"] ], "pressureWheels": [ ["name","hubGroup","group","node1:","node2:","nodeS","nodeArm:","wheelDir"], {"disableMeshBreaking":false,"disableHubMeshBreaking":false}, {"hasTire":true}, {"enableTireReinfBeams":false}, {"enableTireLbeams":true}, {"enableTireSideReinfBeams":false}, {"enableTreadReinfBeams":true}, {"enableTirePeripheryReinfBeams":true}, //general settings {"radius":0.25}, {"hubRadius":0.18}, {"wheelOffset":0.06}, {"hubWidth":0.165}, {"tireWidth":0.15}, {"numRays":14}, //hub options {"hubTreadBeamSpring":701000, "hubTreadBeamDamp":4}, {"hubPeripheryBeamSpring":701000, "hubPeripheryBeamDamp":4}, {"hubSideBeamSpring":901000, "hubSideBeamDamp":4}, {"hubNodeWeight":0.3}, {"hubNodeMaterial":"|NM_METAL"}, {"hubFrictionCoef":0.5}, //tire options {"wheelSideBeamSpring":2100,"wheelSideBeamDamp":5}, {"wheelSideBeamSpringExpansion":251000,"wheelSideBeamDampExpansion":20}, {"wheelSideTransitionZone":0.08,"wheelSideBeamPrecompression":0.99}, {"wheelReinfBeamSpring":15000,"wheelReinfBeamDamp":145}, {"wheelReinfBeamDampCutoffHz":500,"wheelReinfBeamPrecompression":0.99}, {"wheelTreadBeamSpring":121000,"wheelTreadBeamDamp":44}, {"wheelTreadBeamDampCutoffHz":500,"wheelTreadBeamPrecompression":0.99}, {"wheelTreadReinfBeamSpring":121000,"wheelTreadReinfBeamDamp":44}, {"wheelTreadReinfBeamDampCutoffHz":500,"wheelTreadReinfBeamPrecompression":0.99}, {"wheelPeripheryBeamSpring":101000,"wheelPeripheryBeamDamp":22}, {"wheelPeripheryBeamDampCutoffHz":500,"wheelPeripheryBeamPrecompression":1}, {"wheelPeripheryReinfBeamSpring":51000,"wheelPeripheryReinfBeamDamp":22}, {"wheelPeripheryReinfBeamDampCutoffHz":500,"wheelPeripheryReinfBeamPrecompression":1}, //general tire values {"nodeWeight":0.09}, {"nodeMaterial":"|NM_RUBBER"}, {"triangleCollision":false}, {"pressurePSI":"$tirepressure_R"}, {"dragCoef":5}, //groundmodel friction multipliers {"frictionCoef":2.5}, {"slidingFrictionCoef":1.0}, {"treadCoef":0.6}, //advanced friction values {"noLoadCoef":1.34}, {"loadSensitivitySlope":0.0002} {"fullLoadCoef":0.35}, {"softnessCoef":0.7}, //deform values {"wheelSideBeamDeform":4600,"wheelSideBeamStrength":6000}, {"wheelReinfBeamDeform":4600,"wheelReinfBeamStrength":6000}, {"wheelTreadBeamDeform":5500,"wheelTreadBeamStrength":7000}, {"wheelPeripheryBeamDeform":5500,"wheelPeripheryBeamStrength":7000}, {"wheelSideReinfBeamDeform":4600,"wheelSideReinfBeamStrength":6000}, //deform values {"wheelSideBeamDeform":11000,"wheelSideBeamStrength":14000}, {"wheelReinfBeamDeform":101000,"wheelReinfBeamStrength":101000}, {"wheelTreadBeamDeform":8100,"wheelTreadBeamStrength":11000}, {"wheelTreadReinfBeamDeform":8100,"wheelTreadReinfBeamStrength":11000}, {"wheelPeripheryBeamDeform":101000,"wheelPeripheryBeamStrength":101000}, {"hubBeamDeform":14000, "hubBeamStrength":88000}, //rear {"selfCollision":false} {"collision":true} {"axleBeams":["axle_RL"]} ["RL", "wheel_RL", "tire_RL", "ax1l", "axwl", 9999, "ax3l", 1, {"torqueCoupling:":"ax2", "torqueArm:":"ax3"}] {"axleBeams":["axle_RR"]} ["RR", "wheel_RR", "tire_RR", "ax1r", "axwr", 9999, "ax3r", -1, {"torqueCoupling:":"ax2", "torqueArm:":"ax3"}], {"selfCollision":true} {"axleBeams":[]},{"disableMeshBreaking":false,"disableTriangleBreaking":false} ], "triangles": [ ["id1:","id2:","id3:"], ], } }
I think this mod should be split up to "weird things" and "actual realistic things" Spoiler: weird things D-series Stupidly Tall Snorkel Pigeon Stupidly Tall Snorkel D-series Rolling Coal ECU D-series FWD transfer case Piccolina roof flatbed M O N O L I T H Bolide 6,0 diesel V8 Wentward roof flatbed Gavril TCX engine for the Burnside Special Piccolina 4,1 diesel V8 H-series stupidly tall snorkel Wentward stupidly tall snorkel Pessima 1G roof flatbed Pessima 2G roof flatbed T-series Rolling Coal ECU Wentward Rolling Coal ECU Gavril TCM engine on the roof for the Barstow T-series Stupidly Tall Snorkel Pigeon JATO LeGran 6,0 diesel V8 Gavril TCM engine in the trunk for the 1G Pessima Wentward Stupidly Tall Exhaust Tiny box trailer Grand Marshal FWD Differential Piccolina diesel V6 TBarstow Covet Stupidly Tall Snorkel Barstow Stupidly Tall Exhaust stacks Bluebuck Stupidly Tall Exhaust stacks Covet Stupidly Tall Exhaust stacks Grand Marshal Stupidly Tall Exhaust stacks H-series Stupidly Tall Exhaust stacks Roamer Stupidly Tall Exhaust stacks Covet Moonhawk engine option to be a M O N O L I T H Spoiler: actual realistic things Pigeon Snorkel D-series Dually short pickup conversion parts D-series Offroad/Cargo Basket D-series old Pig bed Pigeon flatbed H-series flatbed T-series flatbed electric Piccolina Wider Pigeon tires turbos for the Ibishu 0,6 Inline 3 adjustable ECU the Ibishu 0,6 Inline 3 electric Burnside special T-series Alternate Bumper T-series Wentward rebadge T-series Alternate Taillights FCV Cargo Basket ETK 800 Cargo Basket Wentward Tow Hitch T-series Tow Hitch electric LeGran electric Pigeon FCV 1,9 TDI LeGran 1,9 TDI ETK 800 1,9 TDI ETK K 1,9 TDI ETK I 1,9 TDI Pessima 1G 1,9 TDI Hopper 1,9 TDI Covet 1,9 TDI 200BX 1,9 TDI Pigeon 1,6 Inline 4 Pigeon Bedcover D-series Steel Bedcap Pigeon Camper bedcap Edit: I have noticed that you are planning a rusty TBarstow, that´s nice
Wait it's inside-out? Never noticed that lol. Thank you, I've fixed it! I'll split it up into two sections on the mod page. I've already finished it, I'm not good with skins but I feel like it's alright:
DaddelZeit updated DaddelZeit's Pack of Stuff with a new update entry: More things Read the rest of this update entry...