Engine Power distribution to diffs

Ezo · Jun 22, 2017

How do i change the percentage of the power that go to the wheels? Im making a R34 mod, but the sunburst diffs send the most power to the front (yes i tryed the both types of AWD transfercases), what i need to change in the jbeam to modify the amount of power tho the wheels? (ps i want to change to F25-R75)

Ezo · Jun 23, 2017

Darren9 said: ↑

In the Sunburst you'd adjust the "diffTorqueSplit" value of the center differential, which is in the transfer case part. The diff has two outputs, 1 and 2, it looks like the "diffTorqueSplit" value is the fraction of torque that goes to output 1 (in the Sunburst output 1 goes to the rear and output 2 to the front), so "diffTorqueSplit":0.75 would give 75 rear and 25 front.
Click to expand...

This way?

Ezo · Jun 23, 2017

Darren9 said: ↑
That would be controlling it by a variable (can be adjusted in the tuning menu), if you look in the stock one that variable you've shown is used in the "powertrain" section just below for the torque split - "diffTorqueSplit":"$difftorquesplit_C"

There's three numbers in the variable, default is the value it spawns with, min the low end of the slider and max the high end of the slider. So the stock one has 0.35, 0.20, 0.80, that's 35% rear when it spawns with 20% to 80% range on the tuning slider. You'd just need to change the 0.35 to 0.75, then it will spawn with 75% rear and stay like that unless the player goes into tuning and moves the slider.
Code:
["$difftorquesplit_C", "range", "", "Differentials", 0.75, 0.20, 0.80, "Center LSD Torque Split", "Percent torque to rear wheels", {"minDis":20, "maxDis":80}],
Click to expand...
Oh, ok thank you very much!

Forums

Mods

Engine Power distribution to diffs

Ezo
Expand Collapse

Ezo
Expand Collapse

Ezo
Expand Collapse

Useful Searches

Engine Power distribution to diffs

Ezo Expand Collapse

Ezo Expand Collapse

Ezo Expand Collapse

Ezo
Expand Collapse

Ezo
Expand Collapse

Ezo
Expand Collapse