G920 Brakes Too Sensitive

Hi there, I have a g920 and when I play Beamng my brakes hit 100 on the ui when I'm only pushing the pedal to about 50%. The brakes lock up way too early making driving near impossible. I've tried unplugging them and plugging them back in then fully depressing the pedal, Ive tried doing the same after a computer restart, reassigning the axis in game changing the linearity settings but nothing helps. Any help would be appreciated, thanks.

 

The first thing I'd check would be GHUB. Check the pedal input for the brake and see if it reaches 100% when the pedal is fully depressed. If everything looks okay, try launching BeamNG in safe mode and checking to see if the problem is still there.

 

The problem is gone when I launch the game in safe mode so I tried a reinstall but that did not help.

 

Maybe try resetting the keybinds for the wheel? I think you can do that by going to the Hardware tab in controls, and then clicking reset for the bindings for your wheel. I'd suggest maybe taking a screenshot or something of your current bindings in case you have customized them and want to set them back after resetting them.

 

I tried, not fixed unfortunately. I'll add that the problem likely isn't with my pedals, iRacing telemetry is perfect on them.

 

Based on the fact that it works in iRacing, and when BeamNG is running in safe mode, it might be a problem with your userfolder. Try moving your userfolder to another spot on your PC and let the game generate a new one. If your brake pedal works, you can move anything you want to keep from the old userfolder to the new one. Just make sure that you don't move everything at once, since something you move over might cause the issue to come back.

 

This seems to have fixed it, thank you.

 

No problem!