Hey guys. I have set everything up in beamng for my t500. But when I accelerate it reverses, I can't steer at all, not even with keyboard. Nothinbg is working properly. Any ideas? Cheers.
The t500rs should work out of the box. If it doesn't, please reset the bindings. If it still doesn't work, please make sure you are using the latest thrustmaster drivers. If it still doesn't work, please remove any mods you may have installed. If it still doesn't work, I'm out of ideas Please attach your beamng.log and beamng-input.log files from documents/beamng.drive so I can take a look. Note that, while a steering wheel is plugged in, all keyboard input is overriden and will not necessarily work. If you want to use the keyboard instead of the wheel, please unplug your wheel and see if that works. If it doesn't, I'll hopefully find some clues from your log files. Thanks!
Hi I am having problems getting my T500RS to work. A few times the wheel and pedals have worked briefly after loading a map, but only for a few seconds. Most of the time it does not register any input at all. However, force feedback is working and the wheel turns if I turn with a gamepad/keyboard. If I try to bind the controls, input from the wheel/pedals are not registered either. My keyboard and gamepads work as expected. I have the latest drivers and firmware, no mods and the T500RS is listed under controls->hardware (below keyboard and gamepads). I have attached my log-files. Any help enabling me to enjoy this fantastic game with proper input would be much appreciated, thanks --- Post updated --- After changing the USB-port my wheel is now working properly.