Jbeam issue.

I'm trying to add precompression to my lower control arms and also reposition the steering knuckle node, but regardless what values i put here, it doesn't seem to change what so ever. What could be the cause of this? I don't get any errors and I'm sure I use my own part. Very frustrating. Thanks!

Code:

         //tie rod end with ackerman delete
     ["fh3r",-0.62, -1.235, 0.365],
         ["fh3l", 0.62, -1.235, 0.365],

I can put anywhere from 0 to 1000 into these values and it doesn't make a difference. But when I add random words to the values it gives me errors lol

Code:

//lower arm
          {"beamDeform":41850,"beamStrength":652000},
          {"beamSpring":14001000,"beamDamp":100},
   
          ["fx2r","fh1r",{"beamPrecompression":2}],
          ["fx2l","fh1l",{"beamPrecompression":2}],

          {"beamDeform":51300,"beamStrength":252000},
          {"beamSpring":12001000,"beamDamp":100},
          ["fx1r","fh1r",{"beamPrecompression":2}],
          ["fx1l","fh1l",{"beamPrecompression":2}],

Supposedly the value 2 should be very extreme and give me around 45 degrees camber, but it doesn't change anything at all, and it doesn't matter what values i enter. I've also disabled all the limiters by commenting them.

 

Turns out i had a copy of the file stored in a folder. I thought that would disable it but apparently not.