Logitech g29 issues

Hello,
My logitech g29 that I've had for about 2 years is starting to act up.
It seems to have crashed, or lost connection and regained connection from the pc instantaneously, So im using the wheel just fine, it all of a sudden goes from one side of the turn spectrum to the other and the lights light up as it does when it first starts( or when you first plug it in), and is unresponsive to the game.
The only way to fix it, Is to disconnect it from the pc, and reconnect it, otherwise the wheel doesn't do anything to the game, I can turn the wheel and feel the center spring or whatever as its harder to turn, but the game doesn't respond during the initial "crash reboot", I have to manually disconnect it from the pc and reconnect for it to work again. At random, sometimes it happens quite often, and sometimes it takes 30 mins before it happens. Has anyone encountered this before? I've reinstalled Ghub and tried to find this issue anywhere else but can't.

Side Issue:
Thee same logitech g29, With semi's, The logitech wheel turns all the way, but the semi in game doesn't, I've re-calibrated the wheel time and time again in game and beamng and nothing fixes this, and its quite game-breaking, Turns into 12-point turns with a trailer to use the semi(any config) with my wheel and h shifter..

 

For the side issue, check GHub for Sensitivity. If it’s too low it might need you to turn the wheel farther than its capable of. I have 50 on my wheel. Let me know if it works…
--- Post updated ---

And I recommend checking (for the side issue and main issue) try to look into vehicle specific keybinds with the semi issue and also check the Force Feedback tab (ingame) and recalibrate. Make sure to tick the box „Invert“ when calibrating. Good Luck!!
--- Post updated ---

And I recommend checking (for the side issue and main issue) try to look into vehicle specific keybinds with the semi issue and also check the Force Feedback tab (ingame) and recalibrate. Make sure to tick the box „Invert“ when calibrating.