Mesh isn't aligned with jbeam

So, I made a dragster chassis not to long back and I decided to port it to beamng. The mesh itself ported completely fine. However, the mesh wasn't aligned with the jbeam at all



I set up the flexybody positions correctly and the jbeam itself was centered with the mesh when I made it. I also set the position of the mesh by doing ctrl A but that didn't fix the issue either. I changed the reference nodes as well but that also didn't solve the situation. Any fixes?

 

You need to apply Location, Rotation, and Scale in Blender on the model that's going to be your flexbody (Ctrl. A and apply each one,) then export.

Do that, and see if that fixes it.