1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Other | Progression Thread

Discussion in '#Stuff' started by Godzilla!, Sep 4, 2016.

  1. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    This will be a progression thread for my mods. This is so the other threads don't get cluttered.

    This'll work like Variety Mod's progression thread.


    Moonroof 200BX
    -Bugs: I discovered some mishaps that are in the mod from the 0.6(.1) update. Things like rear flairs aren't working. This has been fixed.

    -Moonroof Sport: Added Moonroof badges to the car.

    -New Trims:
    A few new trims are in the works.

    1. Bozilla:
    screenshot_00983.png
    (Ignore the lack of rear fender flairs) It's heavily based on a modified Moonroof Sport, but equipped with street-racer parts like a Stage 2 turbo. Exclusive skin for this beast is in the works!

    2. Stock Moonroof:
    This will be based on a 200BX that is cheaper than the Sport. Will have less power and be more family-friendly.

    3. West Coast Special:
    Something like the California Special Mustang. Will have an ECA counterpart.

    4. Secret c:


    Bolide Targa
    Bugs: I fixed the trim, it works now.
     
    #1 Godzilla!, Sep 4, 2016
    Last edited: Sep 4, 2016
    • Like Like x 5
  2. MilanKD

    MilanKD
    Expand Collapse

    Joined:
    Jul 23, 2016
    Messages:
    440
    I love it.
     
  3. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    Thanks, glad you like it!


    Moonroof 200BX
    -All trims are finished except Rice Rocket.

    -New thumbnails (yay).

    -East Coast Special!
    screenshot_00992(2).png screenshot_00993(2).png screenshot_00994(2).png


    YouTuber Plates
    Finally starting work on V2 again. I'll work on 5 plates right now and more later.

    WIP Plates:
    -MattShea
    -NFKRZ
    -BeamNG
    -BeamNG Pro
    -Kryton

    UPDATE

    Sometime tomorrow, I'm going to add the Bolide Targa and updated Moonroof 200BX (V2) to mods section. Both mods only need some tweaking before I add them (Like a new thumbnail for Bolide and optimization for both).

    In the meantime, here are the new thumbnails for the Moonroof 200BX.
    ecs_A.png moonroof_A.png moonroofsport_A.png ricerocket.png wcs_A.png bozilla.png

    Also, working on new factory graphics for the Bolide Targa...and a new thumbnail.
    Unfortanetly, I'm getting this:
    screenshot_01017.png

    Bolide isn't working at all, so I'm trying to find the problem. One little typo in the jbeam can cause this.

    UPDATE

    I got the Bolide working, and made a simple factory graphics for it.
    screenshot_01020.png

    On the 200BX, I decided to remake the skin for Rice Rocket by using the PlastiDip purple as a background in the skin's file, then I created a special coupe_c and coupe_d files for a painted rear panel. Then I forgot a line in Materials.cs and it resulted in this strange chrome purple.
    screenshot_01021.png screenshot_01022.png screenshot_01023.png

    I fixed this problem by remapping coupe_c. There will be 2 versions of Rice Rocket: One with the skin, one without. The one with the skin will have a white PlastiDip-like color as default, and the skin-less would remain with the gorgeous PlastiDip purple.

    ...and I accidentally deleted the original Rice Rocket's config file in WinRar so I'm going to recreate it (Will be a simple 1 minute job though).
     
    #3 Godzilla!, Sep 4, 2016
    Last edited: Sep 5, 2016
    • Like Like x 2
  4. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
  5. MilanKD

    MilanKD
    Expand Collapse

    Joined:
    Jul 23, 2016
    Messages:
    440
  6. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    Well luckily, both mods are really close to being finished (again).

    I just need to optimize the Bolide's folder and update the glass for the 200BX.
     
  7. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    I uploaded V2 of Moonroof 200BX to the mods section, currently awaiting approval.


    I had to do an unfortunate change due to mods section not allowing actual brands in the mod:
    The word 'PlastiDip' in the color names.

    I knew they were not going to allow that so I just renamed it from PlastiDip Purple/White to Plastic Purple/White.



    Still tweaking Bolide Targa.



    I'ma continue YouTube Plates later this week.
     
  8. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
  9. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    Bolide Targa was uploaded to Mods section, currently waiting for approval. :rolleyes:
     
    • Like Like x 1
  10. MilanKD

    MilanKD
    Expand Collapse

    Joined:
    Jul 23, 2016
    Messages:
    440
    Love it.
     
    • Like Like x 1
  11. CarBro74

    CarBro74
    Expand Collapse

    Joined:
    Mar 29, 2016
    Messages:
    3,673
    Great progress!
     
  12. Stude

    Stude
    Expand Collapse
    Banned

    Joined:
    May 1, 2016
    Messages:
    920
    Good job!
    also, can i make a thread?
     
  13. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    In the middle of playing FH3, BeamNG updated straight to 0.7.

    I'm going to check on my current released mods tomorrow if they still work properly. The Bolide and 200BX might need an update.
     
    • Like Like x 1
  14. 1185323118

    1185323118
    Expand Collapse

    Joined:
    Oct 11, 2015
    Messages:
    931
    It's OK, everyone is playing FH3 now:rolleyes:
     
    • Like Like x 1
  15. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    Tested both mods, both work in 0.7. Although, deformation on both is a bit wonky and the skin for the Moonroof Sport is not correct (The skin is only physical and can be selected with the current version, it isn't even that noticeable).

    They will receive an update by the end of this week.
     
    #15 Godzilla!, Oct 5, 2016
    Last edited: Oct 5, 2016
  16. blackjack8289 2

    blackjack8289 2
    Expand Collapse

    Joined:
    Oct 19, 2015
    Messages:
    39
    Just an off topic question but my computer did not load the second festival in FH3. Did it load for you?

    OT: The moon roof 200BX is awesome.
     
  17. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    If it hasn't finished installing (Like the Xbox) then it needs to finish; if not, try restarting the game or Windows. I don't know much about the PC version, I have an Xbox disc so it's not the version I can play on PC.

    Also, glad you like the Moonroof 200BX. :)
     
  18. blackjack8289 2

    blackjack8289 2
    Expand Collapse

    Joined:
    Oct 19, 2015
    Messages:
    39
    FH3 is updating as I type hope it is fixed after this
     
  19. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    0.8 happened.


    Moonroof 200BX

    Already uploaded the fix for Mods section, fixed version is V2.1.

    YouTuber Plates
    Releasing V1.5 that adds 10 new plate designs.

    Project Godzilla V1
    Will release the fix as V1.3.

    Project Godzilla V2
    The RHD mod Expired made doesn't work in the latest version, so I have to make the car LHD again and release it as is...for now (this is Japanese, it should be RHD, but BeamNG doesn't think so). Released version is V1.0.

    Bolide Targa
    Already uploaded the update for it in Mods section. Won't get anymore info till tomorrow morning. Updated version is V1.0
    also:
    screenshot_01448.png screenshot_01449.png screenshot_01450.png
     
    #19 Godzilla!, Dec 22, 2016
    Last edited: Dec 22, 2016
    • Like Like x 1
  20. Godzilla!

    Godzilla!
    Expand Collapse

    Joined:
    Mar 17, 2013
    Messages:
    2,027
    Pessima Florida
    This is that blue Pessima in the photo album. It's just like the Moonroof 200BX, but it's not a 200BX. Currently, jbeam has a few glitches and the roof doesn't look that good to me, especially when the 200BX version is next to this. Currently, it deforms quite well (I said that it deformed badly earlier, I fixed the cause).

    screenshot_01517.png

    Currently working on the "skin," unfortunately, it has no 2nd UV channel support so it doesn't officially support skins. I have to work on editing the car's own texture file for the body, the new textures will give the Florida version a dark roof and spoiler (when the spoiler is equipped). The problem I'm having is how the whole texture system for this car is mapped out. Either the dark roof appears on both the stock and Florida versions or no dark roof at all.

    Project Godzilla (Both versions)
    I'm thinking about packing both versions into a zip and release them in my Godzilla-based group (I'ma separate the Pessima and Sunburst from V1's zip).

    Hopper JP
    When the Hopper is released, I'ma try to make a Jurassic Park themed skin for it (Even though I bet others are planning to do so). I'ma make mine not exactly Jurassic Park, it'll have a different yet very similar name (VarietyMod/DMMP style).

    Hopper NEEDS to have some 2nd UV channel support when it's released for me to do this. Hopefully it does, but there is a 50/50 chance it won't. In fact, one car still don't have 2nd UV channel support after being out for over a year (-cough-Melty Pessima).
     
    #20 Godzilla!, Jan 7, 2017
    Last edited: Jan 7, 2017
    • Awesome Awesome x 2