Solved problem with drift steering

hello everyone. i have a problem with Lamborghini Murcielago mod ( some details made by me ). i have added drift steering. sometimes when i'am drifting happening this ( on photo ). wheelaxle isn't broke, wheel can normally rotate and can be fixed by just driving but anyway i want to fix it and i don't know how to do this, can someone help please? sorry for bad English
code:
"hydros": [
["id1:","id2:"],
{"beamPrecompression":1.0, "beamType":"|NORMAL", "beamLongBound":1, "beamShortBound":1},
{"beamSpring":1001000,"beamDamp":50,"beamDeform":"FLT_MAX","beamStrength":275000},
["fh6r","fx5l",{"factor":-0.170,"steeringWheelLock":350,"inRate":1.25,"outRate":1.25}],
["fh6l","fx5r",{"factor":0.170,"steeringWheelLock":350,"inRate":1.25,"outRate":1.25}],
{"beamPrecompression":1.0, "beamType":"|NORMAL", "beamLongBound":1, "beamShortBound":1},
]

 

Increase steering wheel lock variable to maybe 550? That should work.

 

Put the hydro’s beam strength up. I think that should work.

 

--- Post updated ---

thanks, but this is not working. trying another values doesn't work to

 

then its a problem with the suspension so if there is a solution i have no idea what it is

 

yes, i think that problems with suspension because if i install rrace coilovers, wheel will be detached at all
--- Post updated ---

yes, i think that problems with suspension because if i install rrace coilovers, wheel will be detached at all

 

What about increasing the hydro’s beamstrength.

 

that wouldnt work because it would just pull the suspension apart i think

 

He said the wheel’s still connected, so I think the beam that controls the steering is getting broken.

 

we need to see a picture

 

There’s a picture in the first post.

 

--- Post updated ---

if you need another pictures, i can make it
--- Post updated ---

yes, that really happened when i tried to set all values in "super_suspension_f.jbeam" file to 2.000.000

 

You set all the values?! Only the hydros beam.

 

yes show us photos
--- Post updated ---

we need to see how the suspension is breaking.

 

i tried to set only hydros beam, nothing changed, then i tried to set all "beamstrenght" values to 2.000.000

 

Ok, go into beamng and press ctrl+b. Keep pressing it until you get to “with broken”. Then steer and see what’s breaking. You could also go to “broken only” if it’s easier to see.
--- Post updated ---
You could also send a picture

 

it looks like this

 

I need a picture with the beam viewer on as well.

 

i tried. "broken only" don't shown anything. it looks same as picture at first post
when i installed race suspension, it looked like on picture below

 

Which beams are those? Are they suspension beams, wheel attaching beams, or hydros beams?